DeepCool AK400 CPU Cooler With A Status Display
Specifications
- Model: DeepCool AK400 Digital CPU Cooler
- Socket Compatibility
- Intel: LGA 1150/1151/1155/1156/1200/1700
- AMD: AM4/AM5
- Cooling Capacity (TDP): Up to 220W
- Heat Pipes: 4 x 6mm direct-touch copper heat pipes
- Fan:
- Size: 120mm x 120mm x 25mm
- Type: Fluid Dynamic Bearing (FDB)
- Speed: 500–1850 RPM ±10%
- Airflow: Up to 68.99 CFM
- Noise Level: ≤28 dB(A)
- Connector: 4-pin PWM
- Rated Voltage: 12V DC
- Power Consumption: 1.44W
- LED Lighting: Addressable RGB
- Connectors: 3-pin (+5V-D-G) and 9-pin USB 2.0
- Dimensions:
- Overall: 126mm (L) x 97mm (W) x 156mm (H)
- Heatsink: 120mm (L) x 60mm (W) x 152mm (H)
- Weight: Approximately 695g
Assembly & Installation Instructions
Tools Needed
- Phillips screwdriver
- Thermal paste (if not pre-applied)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Step 2: Install the Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
Step 4: Apply Thermal Paste
- Apply a small pea-sized amount of thermal paste to the center of the CPU.
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
Step 8: Final Checks
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
Tips
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, website.www.deepcool.com/downloadpage/
- Operating system version requirements: Windows 10/Windows 11
FAQs
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
Can I customize the RGB lighting?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
Documents / Resources
 |
DeepCool AK400 CPU Cooler With A Status Display [pdf] User Manual AK400 CPU Cooler With A Status Display, AK400, CPU Cooler With A Status Display, Status Display, Display |