deco X50 Modem Unboxing Router User Guide
One NZ Deco X50 Modem Quick Start Guide
- Plug your X50 modem into power.
- Plug the supplied ethernet cable into the first port on your X50 modem and plug the other end into the ONT (fibre wall box) – this is the unit your local fibre company would have installed in your home, which is connected to the fibre optic cables in the street.
- The light on the side of your modem will flash yellow while it’s starting up, flash blue during set up, and will turn solid green once it’s connected to fibre.
- You can now connect your devices to WiFi using the username SSID and password on the base of your X50 modem OR simply hover your phone camera over the QR code to connect.
- To add more Deco units, manage your network, prioritise devices and heaps more, download the Deco app and follow the prompts. Make sure you select the X50 as your modem type in the app.
Need help setting up?
Call us on 0800 800 966.
ONZ-DECO X50
Read More About This Manual & Download PDF:
Documents / Resources
 |
deco X50 Modem Unboxing Router [pdf] User Guide X50, X50 Modem Unboxing Router, Modem Unboxing Router, Unboxing Router, Router |