User Guide

Indoor/Outdoor Home Security Wi-Fi Camera

This guide provides a brief introduction to the Indoor/Outdoor Home Security Wi-Fi Camera and regulatory information. Features and availability may vary by model and region. All images and steps are examples.

Conventions

More Info

• Specifications: https://www.tapo.com
• Technical Support & Troubleshooting: https://www.tapo.com/support/

Introduction

Your All-Weather Security Guard, Always on the Watch. From the backyard to the nursery, IP65 weatherproofing provides dependable, crystal-clear security, whether indoors or outdoors, rain or shine.

• Indoor & Outdoor 24/7 Monitoring: IP65 weatherproof construction for round-the-clock coverage in any condition.
• 2K Color Night Vision & 2K Clarity During the Day: Captures low-light images in 3MP clarity with embedded spotlights. Superior resolution surpasses traditional Full HD 1080p.
• Secured Local & Cloud Storage^†: Supports up to 512 GB on a microSD card (sold separately) or Tapo Care Cloud subscription for 30-day video history and enhanced notifications.
• Customizable Sound & Light Alarm: Record your own audio for alarms and adjust spotlight brightness for a customized deterrent system.
• IP65 Weatherproof: Performs well in harsh environments with rain and dust.

^† microSD card purchased separately. Actual storage capacity depends on the microSD card size.

^‡ Tapo Care cloud storage services require a subscription. A free trial is provided.

Appearance

The camera features the following components:

• 1. Status LED
• 2. White Lights
• 3. IR Lights
• 4. Lens
• 5. Microphone
• 6. Speaker
• 7. USB Type-C Power Port

microSD Card Slot

Open the cover to insert a microSD card (not included) for local recording. Initialize the card in the Tapo app.

Reset

• Press and hold the Reset button for 5 seconds: Resets Wi-Fi settings.
• Press and hold the Reset button for 10 seconds: Resets to factory settings.

LED Status Indicators

Set Up Your Camera

1. Download Tapo App: Get the Tapo app from the App Store or Google Play, or by scanning the QR code.
2. Log In: Open the app and log in with your TP-Link ID. Create an account if you don't have one.
3. Add Your Camera: Tap the '+' button in the app, select your model, and follow the app instructions.

Set Up Using Amazon Frustration-Free Setup

What is Amazon Frustration-Free Setup?

Amazon Frustration-Free Setup (FFS) simplifies connecting Tapo devices without re-entering Wi-Fi passwords. Requirements include:

• Tapo device supports Amazon FFS.
• Device purchased from Amazon.
• An Amazon FFS-enabled Alexa device or router.
• Wi-Fi information saved to Amazon via Alexa echo.
• Tapo device and router on the same network as your Alexa echo.

LED Indications during Amazon Frustration-Free Setup

If the LED does not turn solid green, try manual setup via the Tapo app.

How to use Amazon Frustration-Free Setup with Tapo devices

1. Open the Amazon Alexa app, tap More, then select Skills & Games.
2. Search for and select Tapo.
3. Tap ENABLE TO USE.
4. Log in with your TP-Link ID bound to your Tapo device and tap Authorize.
5. Plug in your Tapo device; setup completes automatically within two minutes.

Done! If the device appears in the Tapo app's Home page, it's successfully associated with your Amazon account and joined your Wi-Fi network.

Install a microSD Card

To enable local recording, install a microSD card:

1. Open the cover.
2. Insert the microSD card into the slot, ensuring correct orientation, until it clicks.

You can check the card status or format it in the Tapo app under Camera Settings > microSD Card.

Mount Your Camera

The camera can be placed on a table or shelf, or mounted on a wall or ceiling using the provided template and screws. For detailed instructions, visit TP-Link support.

Option 1. Mount to the Ceiling

1. Drill Holes: Use the mounting template to mark and drill two holes (6 mm / 15/64 in. diameter).
2. Unscrew the Bracket: Detach the bracket from the camera base.
3. Secure the Bracket: Insert anchors into the holes and use screws to fix the bracket.
4. Install the Camera: Screw the camera base onto the bracket. Loosen the base to adjust the angle, then tighten to secure.

Option 2. Mount to the Wall

1. Remove the Camera: Tilt and lift the camera at an angle to remove it from its base. Avoid pulling it straight.
2. Install Over the Back Mounting Hole: Ensure the bracket is secured to the base. Push the shaft into the back mounting hole until it clicks.
3. Unscrew the Bracket: Detach the bracket from the camera base.
4. Drill Holes: Use the mounting template to mark and drill two holes (6 mm / 15/64 in. diameter).
5. Secure the Bracket: Insert anchors into the holes and use screws to fix the bracket.
6. Install the Camera: Screw the camera base onto the bracket. Loosen the base to adjust the angle, then tighten to secure.

How to Reset Your Camera

You can reset your camera using the Reset button or through the Tapo app:

• Via Reset Button: Open the cover and press and hold the RESET button.
  • Press and hold for 5s (LED blinks red slowly): Resets Wi-Fi settings only.
  • Press and hold for 10s (LED blinks red quickly): Resets to factory settings.
• Via Tapo App: Go to Camera Settings > Remove Device to factory reset.

Authentication

FCC Compliance Information Statement

Product Name: Indoor/Outdoor Home Security Wi-Fi Camera
Model Number: Tapo C113

USB ADAPTER Models: A806A-050100U-EU1 / A8-501000

Responsible party: TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +16263330234
Fax: +19095276804
E-mail: sales.usa@tp-link.com

This equipment complies with FCC Rules Part 15. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modifications can void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits for an uncontrolled environment. The device and its antenna must not be co-located or operating with any other antenna or transmitter. For mobile configurations, the antennas must be installed to provide a separation distance of at least 20 cm from all persons.

FCC compliance information statement (Power Supply)

Product Name: I.T.E. Power Supply
Model Number: A806A-050100U-EU1 / A8-501000

Responsible party: TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +16263330234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment complies with FCC Rules Part 15. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any unauthorized modifications can void the user's authority to operate the equipment.

CE Mark Warning

OPERATING FREQUENCY: 2412 MHz - 2472 MHz (20 dBm)

EU Declaration of Conformity

TP-Link declares that the Indoor/Outdoor Dual Lens Pan/Tilt Security Camera complies with essential requirements and provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity can be found at https://www.tapo.com/en/support/ce/.

RF Exposure Information: This device meets EU requirements (2014/53/EU Article 3.1a) for limiting public exposure to electromagnetic fields. Compliance is achieved when the device is used at 20 cm from the body.

UKCA Mark

UK Declaration of Conformity

TP-Link declares that the Indoor/Outdoor Dual Lens Pan/Tilt Security Camera complies with the essential requirements and relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity can be found at https://www.tapo.com/support/ukca/.

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation.

Radiation Exposure Statement: This equipment complies with IC radiation exposure limits for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Industry Canada Statement: CAN ICES-003 (B)/NMB-003(B)

Korea Warning Statements:

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice & BSMI Notice

NCC Notice:

• Low-power radio frequency devices must not alter frequency, increase power, or change original design characteristics and functions without approval.
• Use of low-power radio frequency devices must not affect flight safety or interfere with legal communications. If interference occurs, cease use immediately and improve until no interference is present.
• Legal communications refer to radio communications operated according to telecommunications management laws.
• Low-power radio frequency devices must tolerate interference from legal communications or industrial, scientific, and medical (ISM) radio wave radiating equipment.
• To prevent unauthorized viewing or capture of the device's screen, users should change the default password and update it regularly.

BSMI Notice & Safety Precautions:

• Use only the original power adapter or one matching the specified power type.
• Unplug the power cord before cleaning. Do not use liquid cleaners or wet cloths.
• Protect against moisture; do not spill liquids on the product.
• Slots and openings are for ventilation; do not block them to ensure reliable operation and prevent overheating.
• Do not place near heat sources. Avoid enclosed spaces without normal ventilation.
• Do not disassemble or repair the product yourself. Contact the manufacturer or agent for issues.
• The power adapter should be used indoors where the ambient temperature is 40°C or lower.

Restricted Substances Statement:

Note: '〇' indicates the content does not exceed the reference value; '—' indicates it is an exemption.

? Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.

??

Safety Information

• Do not use damaged chargers or USB cables.
• Use only recommended chargers.
• Do not use the device where wireless devices are prohibited.
• The adapter should be easily accessible.
• Use only power supplies provided by the manufacturer in the original packaging.
• Keep the device away from fire or hot environments. Do not immerse in water or any other liquid.
• Do not disassemble, repair, or modify the product.
• Do not use the product if the casing is broken due to risk of electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices like fire alarms, as radio waves may cause malfunction.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or during blasting operations.
• Do not use liquid to clean the product; use a dry cloth only.
• Never insert metal objects into the product. If a metal object enters, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended for medical care. Consult your medical device manufacturer regarding RF shielding.
• Do not use this product in healthcare facilities.
• Do not place heavy objects on the product.
• Unplug the product if left unused for a long time.
• This product may interfere with other electronic devices.
• The adapter should be used indoors where the ambient temperature is 40°C or lower.
• Operating Temperature: -20 °C to 45 °C (-4 °F to 113 °F).
• The camera should be installed at a height no higher than 2 meters.

Please follow safety information. TP-Link is not liable for accidents or damage due to improper use.

Explanation of the symbols on the product label

The product label is located on the bottom of the product and its power supply. Symbols may vary.