Meet Your Motorola XT2401-1, XT2401-2

Put in the cards & power on

1. Insert the SIM tool into the tray hole to pop out the tray.

Make sure you use the correct size SIM card and don't cut the SIM card.

2. Insert the SIM cards with the gold contacts up, then gently push the tray into the slot.

For one SIM model:

The SIM tray has one slot labeled '1'. Insert a Nano SIM card into this slot with the gold contacts facing upwards.

For two SIM models:

The SIM tray has two slots. Slot '1' is for SIM 1. Slot '2' is for SIM 2. Insert Nano SIM cards into these slots with the gold contacts facing upwards. The tray can be turned over to access SIM 2.

3. Press and hold the [power-button] to turn on your phone, then follow the prompts to get started.

To turn off your phone, press the [power-button] and [volume-up-button] buttons at the same time.

Phone Overview

The front of the phone displays the earpiece at the top, a speaker below it, and the front camera. The proximity sensor is located discreetly under the display. On the sides, you'll find the volume buttons (+/-) and the power button. The rear of the device features an array of cameras: an ultra-wide/macro camera, a main camera, a ToF (Time of Flight) lens, and a telephoto camera. A microphone is positioned at the bottom. The fingerprint sensor is integrated into the display. The bottom edge of the phone houses the USB-C/Charger/Headset Jack. The rear also includes a wireless charging area and NFC touchpoint.

Help & More

Get answers, updates, and information:

• Help is here: From the home screen, swipe up and tap Settings > Help to learn how to use your phone and get support.
• Get more: Access software, user guides, and more at www.motorola.com/mymotoedge.
• Get apps: Tap Play Store to browse and download applications.
• Use a headset: A USB-C connector is required for headsets. If using a 3.5mm headset, an adapter is needed (sold separately).
• Connect with 5G: 5G service plan and network coverage are required. Availability varies by area. Contact your service provider for details.

Important Information

Caution: Your phone is shipped with a screen protector. A protector thicker than 0.5mm may affect touchscreen sensitivity.

Legal information: This guide contains essential legal, safety, and regulatory details. For comprehensive information, swipe up from the home screen, tap Settings > Q, and type "Legal information", or visit www.motorola.com/device-legal.

Water, splash, and dust resistance: Tested to IP68 standards under controlled laboratory conditions. The device can withstand immersion in up to 1.5 meters of fresh water for up to 30 minutes. This resistance may decrease with normal wear. The phone is not designed for use underwater. Avoid pressurized water or liquids other than fresh water. Do not attempt to charge a wet phone. It is not waterproof. For details on the water-repellent design and care, swipe up and tap Settings > Help.

Charging and battery safety: To prevent potential injury, the battery should only be removed by a Motorola-approved service center or qualified personnel. If the phone becomes unresponsive, press and hold the [power-button] until the screen turns off and the phone restarts. Use only a compatible Motorola charger (sold separately). Other chargers are not recommended and may affect charging performance. Do not charge the phone in temperatures below -20°C (-4°F) or above 45°C (113°F). Chargers not meeting national standards may pose safety risks. For applicable standards and more information, refer to the "Legal information" section or visit www.motorola.com/device-legal.

Warning about high volume usage: To prevent potential hearing damage, avoid listening at high volumes for extended periods. A warning will appear when the headset volume reaches a high threshold. Tap OK to dismiss, or wait a few seconds and press the [volume-up-button] to continue adjusting volume.

Disposal & recycling: For responsible product and packaging recycling assistance, visit www.motorola.com/recycling.

Class 1 Laser Product: This device is classified as a Class 1 Laser product, safe for normal use per IEC60825-1:2007 and IEC60825-1:2014. It complies with 21 CFR 1040.10 and 1040.11, with exceptions per Laser Notice 50. Do not attempt to modify or disassemble.

Extreme heat or cold: Do not use or store the phone in temperatures below -20°C (-4°F) or above 45°C (113°F). Do not store or transport in temperatures below -20°C (-4°F) or above 60°C (140°F).

Legal disclaimers: Features, services, and applications are network-dependent and may not be available everywhere; additional terms and charges may apply. Product specifications are believed accurate at printing but are subject to change without notice by Motorola.

Arbitration: Your purchase is governed by a binding arbitration clause. See the legal guide for details and opt-out procedures.

SAR information (on e-label): To find Specific Absorption Rate (SAR) values, swipe up from the home screen, tap Settings > Q, type "Regulatory labels", or dial *#07# on your phone. Visit www.motorola.com/sar for more information.

Copyright & trademarks: MOTOROLA, the stylized M logo, MOTO, and the MOTO family of marks are trademarks of Motorola Trademark Holdings, LLC. Google, Android, Google Play, and related marks are trademarks of Google LLC. USB Type-C® is a registered trademark of USB Implementers Forum. All other product or service names are the property of their respective owners. © 2024 Motorola Mobility LLC. All rights reserved.

Product ID: XT2401-1, XT2401-2

Manual Number: XXXXXXXX-A