Liorque Wireless Thermometer & Hygrometer

Main Unit

The main unit displays outdoor and indoor temperature and humidity, weather forecast, and outdoor index.

Main Unit Components:

• 1. Backlight
• 2. Weather Forecast
• 3. Frost Point
• 4. Outdoor Index
• 5. Outdoor Temperature
• 6. Outdoor Humidity
• 7. Outdoor Temperature Trend
• 8. Outdoor Humidity Trend
• 9. Outdoor MAX/MIN Value
• 10. Low Battery Warning (Outdoor Sensor)
• 11. Channel (Outdoor Sensor)
• 12. Indoor Temperature
• 13. Indoor Humidity
• 14. Indoor MAX/MIN Value
• 15. Low Battery Warning (Main Unit)
• 16. Wall Mounting Hole
• 17. Battery Compartment & Battery Cover
• 18. Bracket

Product Features:

Power On:

When the battery is installed correctly, the screen of the main unit will light up and the signal indicator of the outdoor sensor will flash red, indicating that the power is successfully turned on.

Setting (Main Unit):

After successful power-on, the backlight will light up and the screen will be fully displayed for 3 seconds. Then, the backlight will go out, and the screen will flash ℃ or ℉. Press the INDEX button to set the temperature unit.

At this time, you can:

1. Press the CH button to save and exit.
2. Press the MEM button to enter the weather forecast setting. The weather forecast area will flash. Press the INDEX button to adjust the weather condition, then press the CH button or MEM button to save and exit, or wait for 5 seconds for the system to automatically save and complete the setting.

NOTE:

1. In standby mode, press and hold the INDEX button to set the temperature unit and weather forecast.
2. Temperature unit switching is valid for both indoor and outdoor temperature.

Pairing:

After installing the battery in the outdoor sensor, please switch to the desired channel first.

After the main unit is set up, press the CH button to switch to the channel corresponding to the outdoor sensor. The icon flashes, indicating that data is being received. The maximum receiving time is 3 minutes.

Example: If the main unit selects CH1, the outdoor sensor channel should also be switched to 1.

NOTE:

1. In standby mode, press and hold the CH button to clear the data of the current channel and then receive it again.
2. In the event of data interruption, press and hold the CH button to force the data of the channel to be received again.

Weather Forecast:

The weather forecast is for the next 12-24 hours, with an accuracy rate of 70%.

When the outdoor temperature is between -1℃ and 1℃, ❄️ will flash on the screen. When the outdoor temperature is below -1℃, ❄️ will keep on the screen.

MAX/MIN Value for the Past 24 Hours:

Press the MEM button, the screen will display the maximum value, minimum value, and current value of indoor/outdoor temperature and humidity in the past 24 hours.

Press and hold the MEM button to clear the displayed value. For example, in the MAX display, press and hold the MEM button to clear the maximum value of the past 24 hours.

Trend:

View the trend of outdoor temperature and humidity changes.

• In the past hour, if the temperature rises by more than 1℃ and the humidity rises by more than 5%RH, the screen will display ⬆️.
• In the past hour, if the temperature drops by more than 1℃ and the humidity drops by more than 5%RH, the screen will display ⬇️.
• In the past hour, if the temperature changes within 1℃ and the humidity changes within 5%RH, the screen will display ➡️.

Outdoor Index:

The Outdoor Index displays some comfort level; the default display is MOLD. Press the INDEX button to switch to DEW or HEAT.

1. MOLD ?: MOLD indicator consists of temperature and humidity, which shows the possibility of mold growth. Probability of mold growth: 0/LOW/MED/HI.
2. DEW ?: DEW indicator is the temperature at which dew or fog may form in moist air.
3. HEAT ⚠️: HEAT indicator consists of temperature and humidity, displaying the perceived temperature to remind you of the high temperature risk of outdoor activities.

When the outdoor temperature is below 26.6°C, the HEAT temperature is consistent with the outdoor sensor temperature. When the outdoor temperature exceeds 26.6°C, the HEAT temperature will be automatically calculated from the outdoor temperature and humidity. When the outdoor temperature exceeds 70°C, the HEAT temperature will display 70°C.

Low Battery Warning:

When the main unit battery voltage is lower than 3.6V and the outdoor sensor battery voltage is lower than 2.5V, the screen will display ? at the corresponding position. Please replace the battery now.

Outdoor Sensor

The outdoor sensor transmits temperature and humidity data to the main unit.

Outdoor Sensor Components:

• 1. Signal Indicator
• 2. TX button (For manufacturer testing only)
• 3. Channel
• 4. Battery Compartment
• 5. Battery Cover
• 6. Wall Mounting Hole

Outdoor Sensor Installation:

1. Please do not expose the outdoor sensor directly to sunlight or rain. ❌
2. Maintain good ventilation and leave a certain distance between the outdoor sensor and the wall to avoid blocking the ventilation of the sensor.
3. Place the outdoor sensor at a vertical height of about 2.5 meters / 8.20 feet.
4. If there is interference from other 433gHz devices in the house or too many walls, the outdoor sensor data may be frequently disconnected. Please check whether the installation position is correct or not before reconnecting.

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.