Ortis manufactures smart home and workshop controllers, specializing in automatic vacuum switches, humidity sensors, and water level monitoring systems.
Ortis is a provider of intelligent control solutions designed to enhance efficiency in home and workshop environments. The brand is best known for its automatic vacuum switches, which synchronize power tools with dust collection systems to maintain cleaner workspaces.
Beyond workshop tools, Ortis offers a range of home automation devices including in-wall humidity controllers that manage ventilation to prevent mold, wireless lighting controls, and smart pool timers. The company also caters to agricultural and utility needs with products such as automatic chicken coop door openers and electronic float switches for sump pumps and water tanks.
Neueste Handbücher von manuals+ Für diese Marke zusammengestellt.
Häufig gestellte Fragen zu Handbüchern, Registrierung und Support für diese Marke.
If the controller is acting erratically, turn off the power at the circuit breaker for a few seconds and then turn it back on. For a factory reset, check the specific key combination in your model's manual, often involving holding the M and Up/Down buttons.
The Ortis automatic vacuum switch features a shutoff delay (adjustable on some models, typically around 3-10 seconds) to ensure the vacuum continues running briefly after the tool stops, clearing the remaining dust from the hose.
The controller uses sensors (often stainless steel probes) to detect water levels. It can be set to 'Fill' or 'Drain' mode to automatically activate a pump or valve when water reaches a specific high or low threshold.
Most Ortis vacuum switches are rated for 15 Amps (approx. 1875 Watts). Ensure the combined load of the tool and vacuum does not exceed this rating to prevent tripping the breaker.