Einführung
This manual provides essential information for the safe and efficient operation of your Sannover Anita 12 kW Pellet Stove. Please read these instructions carefully before installation, operation, or maintenance. Proper installation and regular maintenance by a qualified specialist are crucial for safety and warranty validity.
Sicherheitshinweise
Important: To ensure the 2-year factory parts warranty, installation, connection to the electrical grid, initial use, maintenance, and any repairs must be performed by a qualified specialist. Annual maintenance is mandatory. Failure to comply with these conditions will void the warranty.
Upon delivery, it is essential to thoroughly inspect the package, both externally and internally, for any damage. Claims for product exchange or refund due to damage cannot be processed without a documented complaint at the time of delivery.
Always ensure adequate ventilation in the room where the pellet stove is installed.
Halten Sie brennbare Materialien vom Herd fern.
Aufstellen
While professional installation is required, understanding the setup process can be beneficial. The Sannover Anita pellet stove is designed for easy integration into your home heating system.
- Platzierung: Ensure the stove is placed on a non-combustible surface and maintains required clearances from walls and furniture.
- Kaminanschluss: The stove requires an 80 mm chimney connection for exhaust. This must be professionally installed and sealed.
- Elektrischer Anschluss: A qualified electrician must connect the stove to the main power supply.
- Pelletbeladung: Once installed, the pellet hopper can be filled with high-quality wood pellets.
Image: The Sannover Anita 12 kW Pellet Stove, shown in a living room setting, demonstrating its compact design and how it fits into a home environment. The stove is red with a dark grey front panel and a visible flame.
Bedienungsanleitung
The Anita pellet stove features a user-friendly digital control panel located on the top of the unit for easy access and operation.
- Ein-/Ausschalten: Use the designated button on the control panel to switch the stove on or off.
- Temperatureinstellung: Adjust the desired room temperature using the controls. The integrated room sensor will help maintain the set temperature efficiently.
- Programmierung: The stove can be programmed for automatic operation, allowing you to set specific heating schedules. Refer to the detailed programming section in the full manual for advanced settings.
- Leiser Betrieb: The cast iron brazier (flame pot) is designed to reduce noise when pellets fall, contributing to a quieter operation, especially in living areas.
- Zuluft: The integrated fan ensures better heat distribution throughout the heated volume, providing comfortable warmth.
Bild: Eine detaillierte view of the Sannover Anita 12 kW Pellet Stove, highlighting the front panel with the visible flame, indicating active operation. The red casing and dark grey door are clearly visible.
Wartung
Regular maintenance is essential for the longevity, efficiency, and safe operation of your pellet stove. Annual maintenance by a qualified specialist is mandatory for warranty validity.
- Ascheentfernung: The removable ash tray should be emptied regularly to prevent buildup and ensure proper airflow. Frequency depends on usage.
- Reinigung: Keep the glass door clean for optimal flame visibility. Ensure the stove is cool before cleaning.
- Professioneller Service: Schedule annual professional maintenance to inspect and clean internal components, flue pipes, and ensure all safety systems are functioning correctly.
Fehlerbehebung
If you encounter issues with your Sannover Anita pellet stove, please consult the following basic troubleshooting steps. For complex problems or any issue affecting safety, contact a qualified technician.
- Herd startet nicht: Check if the stove is properly connected to the power supply. Ensure the pellet hopper has sufficient pellets.
- Schlechte Wärmeleistung: Verify that the ash tray is clean and not overflowing. Ensure the flue is not obstructed.
- Ungewöhnliche Geräusche: While the stove is designed for quiet operation, any unusual or loud noises should be investigated by a professional.
- Fehlercodes: If the digital display shows an error code, refer to the full product manual or contact a service technician.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | Sannover Thermique |
| Modellnummer | ANITA12Bord |
| Leistungsabgabe | 12 kW |
| Farbe | Rot |
| Produktabmessungen (L x B x H) | 53.4 x 53.4 x 104.2 cm |
| Wärmeabgabe | 40945.68 britische Wärmeeinheiten |
| Belüftungstyp | Direkte Belüftung |
| Effizienz | Hohe Effizienz |
| Montagetyp | Freistehende |
| Schornsteinanschluss | 80 mm |
| Approx. Heated Area | Bis zu 120 m² |
| Merkmale | Digital control panel, Integrated room sensor, Cast iron brazier, Removable ash tray, Programmable |
Garantie und Support
The Sannover Anita Pellet Stove comes with a 2-year warranty on factory parts. This warranty is strictly conditional upon:
- Professional installation and connection to the electrical grid.
- Initial use and commissioning performed by a qualified specialist.
- Mandatory annual maintenance carried out by a qualified specialist.
- Any repairs being performed by a qualified specialist.
Failure to adhere to these conditions will invalidate the warranty. For technical support or to schedule professional service, please contact your authorized Sannover dealer or a certified heating technician.
