Einführung
This manual provides instructions for the installation and use of the SmallRig L-Shape Handgrip 4797. This accessory is specifically designed to enhance the ergonomics and functionality of your Sony Alpha 7C II or Alpha 7CR camera, offering improved grip, stability, and versatile mounting options.
The handgrip integrates seamlessly with the camera body, maintaining access to essential functions such as the battery compartment, and features a built-in Arca-Swiss quick release plate for efficient transitions between handheld and tripod shooting.
Lieferumfang
- L-Shape Mount Plate x 1
The package includes one L-Shape Mount Plate. Please ensure all components are present upon unboxing.
Image: The L-Shape Mount Plate with its dimensions and a list of package contents.
Setup: Attaching the Handgrip
- Kamera vorbereiten: Ensure your Sony Alpha 7C II or Alpha 7CR camera is powered off.
- Align the Grip: Position the SmallRig L-Shape Handgrip against the bottom of your camera, aligning the 1/4" screw hole on the grip with the tripod socket on the camera.
- Sichern Sie die Schraube: Use the included flat screwdriver to tighten the 1/4" screw, securing the handgrip to the camera. An anti-twist pin is integrated to prevent rotation.
- Passform prüfen: Verify that the handgrip is firmly attached and does not obstruct the battery compartment or other camera functions. The integrated rubber pad protects the camera from scratches.
Bild: Detailliert view of the secure mounting mechanism, including the 1/4" screw, protective pads, and the flat screwdriver for installation.
Operating the Handgrip
Ergonomische Handhabung
The handgrip features an ergonomic silicone handle designed to improve grip comfort and stability during prolonged shooting sessions. Its contoured shape reduces hand fatigue.
Image: Close-up of the integrated silicone handle, highlighting its ergonomic design and texture.
Vielseitige Montagemöglichkeiten
- Arca-Swiss Quick Release Plate: The base of the handgrip is equipped with a built-in Arca-Swiss quick release plate, allowing for rapid attachment and detachment from compatible tripods and support systems.
- 1/4"-20 Gewindebohrung: Additional 1/4"-20 threaded holes are available for attaching various accessories.
- Gurtschlitz: A dedicated strap slot is included for attaching a wrist strap or neck strap, enhancing security and portability.
Image: The handgrip in use, showing its compatibility with Arca-type tripods and the strap slot for secure handling.
Wartung
- Reinigung: Wischen Sie den Handgriff mit einem weichen, trockenen Tuch ab, um Staub und Fingerabdrücke zu entfernen. Bei hartnäckigem Schmutz kann ein leicht klopfender Ruß verwendet werden.amp Ein Tuch kann verwendet werden, anschließend sollte die Oberfläche sofort getrocknet werden. Scharfe Chemikalien oder scheuernde Materialien vermeiden.
- Lagerung: Store the handgrip in a clean, dry environment away from extreme temperatures and direct sunlight when not in use.
- Inspektion: Periodically check the mounting screw for tightness to ensure the grip remains securely attached to your camera.
Fehlerbehebung
- Der Griff fühlt sich locker an: Ensure the 1/4" mounting screw is fully tightened using the provided flat screwdriver.
- Battery compartment obstructed: Re-check the alignment during installation. The grip is designed to allow full access to the battery compartment. If obstruction occurs, detach and re-attach carefully.
- Camera scratches: The handgrip includes a rubber pad to prevent scratches. Ensure this pad is clean and properly positioned during installation. If scratches occur, verify correct installation and contact support if issues persist.
Technische Daten
| Modellnummer | 4797-SR |
| Kompatibilität | Sony Alpha 7C II, Sony Alpha 7CR |
| Technische Daten | 125.4 x 69 x 60.1 mm (4.9 x 2.7 x 2.4 Zoll) |
| Artikelgewicht | 68 Gramm (2.4 Unzen) |
| Materialien | Aluminiumlegierung, Silikon |
Image: The handgrip showcasing its lightweight yet robust aluminum alloy construction.
Garantie und Support
SmallRig products typically come with a limited warranty against manufacturing defects. For specific warranty details, product support, or to report any issues, please refer to the official SmallRig webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
Offizielles SmallRig WebWebsite: www.smallrig.com
