LEHMANN LGALM-2646

Lehmann LGALM-2646 Gasoline Lawn Mower User Manual

Model: LGALM-2646

1. Einleitung

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 Sicherheitshinweise

Beachten Sie stets die grundlegenden Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern. Die Nichtbeachtung dieser Anweisungen kann zu schweren Verletzungen oder zum Tod führen.

2. Produktüberschreitungview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

Abbildung 2.1: Insgesamt view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

Abbildung 2.2: Ausführlich view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 Schlüsselkomponenten

3. Einrichtung

3.1 Montage

The lawn mower requires minimal assembly. Follow these steps:

  1. Packen Sie alle Komponenten aus dem Karton aus.
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 Erste Kontrollen

Before first use, perform the following checks:

4. Bedienung

4.1 Motor starten

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. Drücken Sie die Primerpumpe (falls vorhanden) 3-5 Mal, bis Kraftstoff sichtbar ist.
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 Mähen

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 Schnitthöhenverstellung

The Lehmann LGALM-2646 features a 7-stage central cutting height adjustment, ranging from 25 mm to 70 mm.

  1. Turn off the engine and wait for the blade to stop completely.
  2. Locate the cutting height adjustment lever, typically near one of the rear wheels.
  3. Pull the lever outwards and move it to the desired height setting. The settings are usually numbered or indicated by notches.
  4. Stellen Sie sicher, dass alle Räder auf die gleiche Höhe eingestellt sind, um einen gleichmäßigen Schnitt zu gewährleisten.

5. Wartung

Regular maintenance ensures optimal performance and extends the life of your lawn mower. Always disconnect the spark plug cap before performing any maintenance.

5.1 Reinigung

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 Klingenpflege

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 Speicherung

For long-term storage (over 30 days), prepare the mower as follows:

6. Fehlerbehebung

Dieser Abschnitt bietet Lösungen für häufig auftretende Probleme.

ProblemMögliche UrsacheLösung
Motor startet nichtNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
Der Motor läuft unrund oder geht aus.Dirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
Ungleichmäßiger SchnittDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
Übermäßige VibrationBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. Spezifikationen

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

BesonderheitDetail
ModellnummerLGALM-2646
Hubraum146 cm³
Motorleistung3.5 PS
LaufwerkstypRear-Wheel Drive (Gasoline-powered)
Schnittbreite46 cm
Schnitthöheneinstellung7 Sekundentage central adjustment
Schnitthöhenbereich25 - 70 mm
GehäusematerialRobuster Stahl
LenkerFaltfunktion
Artikelgewicht29 kg
Produktabmessungen (T x B x H)150 x 52 x 112 cm
FarbeSchwarz / Rot

8. Garantie und Support

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann webWebsite oder wenden Sie sich an Ihren Händler vor Ort.

Hersteller: Lehmann
Marke: LEHMANN

Zugehörige Dokumente - LGALM-2646

Vorview LEHMANN CNC-Rundtische - Hauptkatalog Ausgabe 4 | Baureihen PGD, E, DD
LEHMANNs Hauptkatalog Ausgabe 4 für CNC-Rundtische. Entdecken Sie PGD, E-Serie, DD-Serie und mehr. Hochgeschwindigkeits- und spielfreie Lösungen für die industrielle Automatisierung und Präzisionsfertigung.
Vorview Lehmann Firmware-Updater: Bedienungsanleitung für Schlösser und RFID-Lesegeräte
Dieses Dokument enthält eine Bedienungsanleitung für die LEHMANN Firmware-Updater-Software und beschreibt detailliert, wie Sie die Firmware von Lehmann-Schlössern, RFID-Lesegeräten und -Terminals aktualisieren. Es umfasst Systemvoraussetzungen, kompatible Produkte und eine Schritt-für-Schritt-Anleitung.
Vorview LEHMANN Management Software Benutzerhandbuch: Konfiguration und Bedienung
Umfassendes Benutzerhandbuch für die LEHMANN Management Software (LMS) mit detaillierten Informationen zur Konfiguration, Bedienung und Verwaltung von LEHMANN RFID-Systemen im Offline- und Online-Modus. Behandelt Transponder- und Schlossverwaltung, Benutzereinstellungen und Systemadministration.
Vorview LEHMANN GIRO TA Elektronisches Tastaturschloss mit P2/P4 Adapter - Bedienungsanleitung
Umfassende Bedienungsanleitung für das LEHMANN GIRO TA elektronisches Tastaturschloss mit P2/P4 Adapter. Enthält Informationen zur Installation, Bedienung, Sicherheit, Wartung, Konfiguration und Fehlerbehebung.
Vorview LEHMANN Primary und Secondary Controller Bedienungsanleitung
Diese Bedienungsanleitung beschreibt die Installation, Konfiguration und Wartung des LEHMANN Primary und Secondary Controller für das Captos und Captos iCharge RFID-Schließsystem.
Vorview LEHMANN M610 LEGIC L043-A03 Elektronisches Schließfachschloss – Bedienungsanleitung
Ausführliche Bedienungsanleitung für das elektronische Schließfachschloss LEHMANN M610 LEGIC L043-A03, einschließlich Installation, Programmierung, Bedienung, Wartung und Fehlerbehebung.