NEXPEAK NC175 SAE Verlängerungskabel-Lade- und Erhaltungsgeräte – Benutzerhandbuch
Modell: NC175
1. Produktüberschreitungview
The NEXPEAK NC175 SAE Extension Cable is designed to provide a convenient and reliable connection for battery chargers and maintainer units. It features durable battery clips for direct connection to battery terminals and an SAE connector for compatibility with various charging devices. This cable is ideal for extending the reach of your charger or for easily connecting to batteries in different applications.
Image 1.1: The NEXPEAK NC175 SAE Extension Cable showing the red positive battery clip, black negative battery clip, and the SAE quick disconnect plug.
2. Sicherheitshinweise
Please read and understand all safety instructions before using the NEXPEAK NC175 cable. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the battery charger/maintainer is disconnected from the power source before connecting or disconnecting the battery clips.
- Connect the red (positive) clip to the positive (+) battery terminal and the black (negative) clip to the negative (-) battery terminal.
- Avoid short-circuiting the battery clips by allowing them to touch each other.
- Use in a well-ventilated area. Batteries can produce explosive gases.
- Außerhalb der Reichweite von Kindern aufbewahren.
- Do not use if the cable or clips are damaged.
3. Packungsinhalt
- 1 x NEXPEAK NC175 SAE Extension Cable with Battery Clips
4. Einrichtung
The NEXPEAK NC175 cable is designed for simple plug-and-play operation with compatible SAE connectors.
- Batteriepole identifizieren: Suchen Sie die Plus- (+) und Minus- (-) Anschlüsse Ihrer Batterie. Der Pluspol ist üblicherweise mit einem Pluszeichen gekennzeichnet und größer, der Minuspol mit einem Minuszeichen.
- An die Batterie anschließen:
- Verbinden Sie Rot battery clip to the positiv (+) battery terminal. Ensure a secure connection.
- Verbinden Sie Schwarz battery clip to the negativ (-) battery terminal. Ensure a secure connection.
- Connect to Charger/Maintainer: Plug the SAE connector end of the NC175 cable into the corresponding SAE port on your battery charger or maintainer unit. Ensure the connection is firm.
5. Bedienungsanleitung
Once the NEXPEAK NC175 cable is securely connected to both the battery and the charger/maintainer, you can proceed with operating your charging device according to its own instructions. The NC175 cable acts as an extension and connection point.
- Ensure all connections are tight before activating the charger.
- Monitor the charging process as recommended by your charger's manual.
- To disconnect, first turn off and unplug your charger/maintainer from the power source. Then, disconnect the SAE connector, followed by the black (-) battery clip, and finally the red (+) battery clip.
6. Wartung
Proper maintenance will extend the life of your NEXPEAK NC175 cable.
- Reinigung: Wipe the cable and clips with a dry, clean cloth after each use. Do not use harsh chemicals or abrasive cleaners.
- Lagerung: Store the cable in a dry, cool place, away from direct sunlight and moisture. Ensure the clips are not touching each other or any conductive materials during storage.
- Inspektion: Periodically inspect the cable for any signs of damage, such as frayed wires, cracked insulation, or corroded clips. If damage is found, discontinue use immediately.
7. Fehlerbehebung
Sollten Sie auf Probleme stoßen, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Ladegerät erkennt Akku nicht. | Loose or incorrect connection of battery clips or SAE connector. | Ensure red clip is on positive (+), black clip on negative (-). Verify SAE connector is fully inserted. |
| Das Kabel scheint beschädigt zu sein. | Physical wear and tear or improper handling. | Discontinue use immediately. Do not attempt to repair. Replace the cable. |
For issues not listed here, please refer to the troubleshooting section of your battery charger/maintainer's manual or contact NEXPEAK customer support.
8. Spezifikationen
| Modell | NC175 |
| Marke | NEXPEAK |
| Technische Daten | 5.9 x 5.1 x 1.58 inches (approximate cable length and clip size) |
| Artikelgewicht | 3.04 Unzen |
| Eingangslautstärketage (Kompatibilität) | Compatible with chargers up to 240 Volts (refer to your charger's specifications) |
| Steckertyp | SAE Quick Disconnect, Battery Alligator Clips |
9. Garantie und Support
NEXPEAK products are manufactured to high-quality standards. For warranty information or technical support, please visit the official NEXPEAK webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
Für weitere Unterstützung besuchen Sie bitte: NEXPEAK Official Store on Amazon
