1. Einleitung
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Edesa One Vertical Electric Water Heater. Please read these instructions carefully before installation and retain them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of the appliance.
Figure 1: Edesa One Vertical Electric Water Heater, 80 Liters.
2. Sicherheitshinweise
Wichtig: Die Nichtbeachtung dieser Sicherheitshinweise kann zu Stromschlägen, Bränden, Sachschäden oder Personenschäden führen.
- Installation und Wartung müssen von qualifiziertem Personal gemäß den örtlichen Vorschriften und Normen durchgeführt werden.
- Stellen Sie sicher, dass das Netzteil mit der Lautstärke übereinstimmttage, wie auf dem Typenschild des Geräts angegeben.
- Betreiben Sie den Warmwasserbereiter nicht, wenn das Netzkabel oder der Stecker beschädigt ist.
- Do not block or cover any ventilation openings on the appliance.
- Before any maintenance or cleaning, disconnect the appliance from the main power supply.
- Das Gerät muss ordnungsgemäß geerdet sein.
- Halten Sie brennbare Materialien vom Warmwasserbereiter fern.
- Dieses Gerät ist nicht für den Gebrauch durch Personen (einschließlich Kinder) mit eingeschränkten physischen, sensorischen oder geistigen Fähigkeiten oder Mangel an Erfahrung und Wissen bestimmt, es sei denn, sie werden von einer für ihre Sicherheit verantwortlichen Person beaufsichtigt oder erhalten Anweisungen zur Verwendung des Geräts.
3. Produktüberschreitungview und Funktionen
The Edesa One Vertical Electric Water Heater is designed for efficient hot water supply in residential settings. It incorporates several features to enhance performance, safety, and durability.
Hauptmerkmale:
- Hochdichte Isolierung: The polyurethane foam insulation minimizes heat loss, contributing to energy efficiency. This insulation is manufactured using CFC-free gases, making it environmentally responsible.
- Elektrostoppschutz: A specialized safety system that automatically cuts off the power supply in case of electrical leakage or overheating, preventing potential hazards.
- Präzise Temperaturregelung: An external control knob allows for easy and precise adjustment of the water temperature, enabling users to optimize energy consumption based on seasonal needs.
- O'PRO-System: This innovative system extends the lifespan of the magnesium anode by 50%, significantly increasing the durability of the water heater's tank.
Figure 2: Edesa One Water Heater Features Overview. This diagram highlights the available capacities (30-150L), temperature regulator, 3-year tank warranty, and 3-year total warranty.
Figure 3: Control Panel. The control panel allows users to select different operating modes, including a boost function for rapid heating and an eco mode for energy saving. It also indicates Wi-Fi connectivity status for smart control.
Figure 4: High-Density Insulation. This image illustrates the high-density polyurethane foam insulation, a key component that minimizes heat loss and contributes to the water heater's energy efficiency.
4. Einrichtung und Installation
The Edesa One water heater is designed for vertical wall mounting. Professional installation is highly recommended to ensure safety and compliance with all local plumbing and electrical codes.
Installationsschritte (Allgemein)view):
- Auspacken: Carefully remove the water heater from its packaging. Inspect for any damage.
- Standortauswahl: Choose a suitable location for vertical wall mounting, ensuring the wall can support the full weight of the water heater when filled with water (approx. 101 kg for 80L model). Ensure adequate space for maintenance and ventilation.
- Montage: Securely mount the water heater to the wall using appropriate fasteners and brackets (not included, typically).
- Sanitäranschlüsse: Connect the water inlet and outlet pipes. Ensure all connections are watertight. The included safety valve and sleeve must be installed correctly.
- Elektrischer Anschluss: Connect the appliance to a dedicated electrical circuit with proper grounding, following local electrical codes. The water heater operates at 230 Volts and 1500 Watts.
- Füllen des Tanks: Before powering on, open a hot water tap in your home to allow air to escape and the tank to fill completely with water. Close the tap once water flows steadily.
Figure 5: Water Connections and Regulator. The bottom section of the water heater features clearly marked connections for water inlet and outlet, along with the accessible external temperature regulation knob for user adjustment.
5. Bedienungsanleitung
Once installed and filled with water, operating your Edesa One water heater is straightforward.
Erstinbetriebnahme:
- Ensure the tank is completely filled with water (as per installation step 6).
- Connect the water heater to the main power supply.
- Use the external temperature regulation knob to set your desired water temperature. For energy saving, it is recommended to set the temperature to the lowest comfortable level.
- The water heater will begin heating the water. The heating time will vary depending on the initial water temperature and the selected setting.
Temperatureinstellung:
The external knob allows you to easily adjust the water temperature. Turning the knob clockwise typically increases the temperature, while turning it counter-clockwise decreases it. Adjust the temperature as needed for comfort and energy efficiency.
6. Wartung
Regular maintenance ensures the longevity and efficient operation of your Edesa One water heater.
- Anode Inspection/Replacement: The magnesium anode protects the tank from corrosion. Thanks to the O'PRO system, its lifespan is extended. However, it should still be inspected periodically (e.g., every 1-2 years, depending on water quality) and replaced by a qualified technician if significantly depleted.
- Draining and Descaling: In areas with hard water, mineral deposits can accumulate inside the tank. Periodically draining and descaling the tank (e.g., annually) can prevent efficiency loss and damage. This procedure should be performed by a qualified technician.
- Sicherheitsventilprüfung: Periodically check the safety valve to ensure it is not blocked and functions correctly. Follow manufacturer guidelines for testing.
- Außenreinigung: Reinigen Sie die Außenseite des Warmwasserbereiters mit einem weichen, fusselfreien Tuch.amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
Vorsicht: Always disconnect the water heater from the power supply before performing any maintenance.
7. Fehlerbehebung
In diesem Abschnitt werden häufig auftretende Probleme behandelt, die bei Ihrem Warmwasserbereiter auftreten können.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein heißes Wasser | Keine Stromversorgung Thermostateinstellung zu niedrig Ausfall des Heizelements | Prüfen Sie den Leitungsschutzschalter/die Sicherung. Stellen Sie den Thermostat auf eine höhere Einstellung ein Wenden Sie sich an einen qualifizierten Techniker. |
| Unzureichendes Warmwasser | Thermostateinstellung zu niedrig übermäßiger Warmwasserverbrauch Ablagerungen im Tank | Erhöhen Sie die Thermostateinstellung Reduce hot water consumption Contact qualified technician for descaling |
| Wasser zu heiß | Thermostateinstellung zu hoch | Thermostateinstellung verringern |
| Wasserleck | Lose Verbindungen Fehlerhaftes Sicherheitsventil Tankkorrosion | Verbindungen festziehen Contact qualified technician for inspection/replacement Wenden Sie sich an einen qualifizierten Techniker. |
| Ungewöhnliche Geräusche | Sedimentablagerungen Problem mit dem Heizelement | Contact qualified technician for descaling/inspection |
If you are unable to resolve an issue using this guide, please contact customer support or a qualified technician.
8. Technische Daten
Below are the technical specifications for the Edesa One Vertical Electric Water Heater 80L (Model: 951320).
| Spezifikation | Wert |
|---|---|
| Marke | EDESSA |
| Modellnummer | 951320 |
| Kapazität | 80 Liter |
| Produktabmessungen (H x B x T) | 81.1 x 43.3 x 45.1 cm |
| Produktgewicht (leer) | 21 kg |
| Bandtage | 230 Volt |
| Elektrische Leistung | 1500 Watt |
| Energieeffizienzklasse | C |
| Montagetyp | Vertikale Wandhalterung |
| Im Lieferumfang enthaltene Komponenten | Cable, Safety Valve, Sleeve |
| Hersteller | Gruppe Atlantik |
| Availability of Spare Parts in EU | 10 Jahre |
Figure 6: Product Data Sheet. This image displays the official product data sheet, including detailed technical specifications and a QR code linking to the EPREL database for further information.
Detaillierte Produktinformationen finden Sie in der EPREL-Datenbank: https://eprel.ec.europa.eu/qr/1535936
Figure 7: Energy Label. The energy label for model 951320 indicates an energy efficiency class of C and an annual energy consumption of 1428 kWh.
9. Garantieinformationen
The Edesa One Vertical Electric Water Heater comes with a 3 Jahre Gesamtgarantie, which includes a specific 3 Jahre Garantie auf den Tank. This warranty covers manufacturing defects and ensures reliable operation under normal use conditions. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty card included with your product or contact customer support.
10. Kundendienst
For technical assistance, spare parts, or warranty inquiries, please contact Edesa customer support:
- Dienstleister: Service Avant-Vente international
- E-Mail: masterdataarticle@groupe-atlantic.com
- Telefon: +33 (0)1 85 32 00 14
