BEZGAR 1:14 All Terrain ferngesteuerter Monstertruck TC141 Benutzerhandbuch

1. Einleitung

This manual provides essential instructions for the safe and effective operation of your BEZGAR 1:14 All Terrain Remote Control Monster Truck, Model TC141. Please read this manual thoroughly before first use and retain it for future reference. This remote control truck is designed for all-terrain use, offering durability and responsive control for an engaging experience.

2. Lieferumfang

• BEZGAR 1:14 Remote Control Monster Truck (TC141)
• 2.4-GHz-Fernbedienung
• 3.7V 500mAh Rechargeable Lithium-Ion Battery (for truck)
• USB-Ladekabel
• Small Screwdriver (for battery compartments)

3. Einrichtung

3.1. Laden der LKW-Batterie

1. Suchen Sie das Batteriefach an der Unterseite des Lkw.
2. Verwenden Sie den mitgelieferten Schraubendreher, um die Abdeckung des Batteriefachs zu öffnen.
3. Connect the 3.7V 500mAh rechargeable Lithium-Ion battery to the truck's connector.
4. Verbinden Sie das USB-Ladekabel mit dem Akku.
5. Stecken Sie das USB-Ladekabel in ein Standard-USB-Netzteil (nicht im Lieferumfang enthalten) oder in einen USB-Anschluss Ihres Computers.
6. Die Kontrollleuchte am USB-Kabel leuchtet während des Ladevorgangs und erlischt, sobald der Akku vollständig geladen ist.
7. Once charged, disconnect the battery, place it back into the compartment, and secure the cover with the screwdriver.

3.2. Einlegen der Batterien in die Fernbedienung

1. Suchen Sie das Batteriefach an der Unterseite der Fernbedienung.
2. Verwenden Sie den mitgelieferten Schraubendreher, um die Abdeckung des Batteriefachs zu öffnen.
3. Legen Sie 2 x AA-Batterien (nicht im Lieferumfang enthalten) in das Batteriefach ein und achten Sie dabei auf die richtige Polarität (+/-).
4. Replace the cover and secure it with the screwdriver.

3.3. Pairing the Truck and Remote Controller

1. Ensure both the truck and the remote controller have charged batteries installed.
2. Turn on the truck using the ON/OFF switch located on its underside.
3. Turn on the remote controller using its ON/OFF switch. The indicator light on the remote will flash.
4. Wait for a few seconds. The indicator light on the remote controller will become solid, indicating successful pairing.
5. Falls die Kopplung fehlschlägt, schalten Sie beide Geräte aus und wiederholen Sie die Schritte.

4. Bedienungsanleitung

4.1. Grundlegende Steuerelemente

• Vorwärts rückwärts: Use the trigger on the remote controller. Pull the trigger to move forward, push it to move backward.
• Lenkung: Use the steering wheel on the side of the remote controller to turn left or right.

4.2. Fahrtipps

• Üben Sie zunächst auf einer offenen, ebenen Fläche, um sich mit der Bedienung vertraut zu machen.
• The truck is designed for all-terrain use, including sand, mud, and concrete.
• Avoid driving in deep water or extreme conditions to prevent damage to electronic components.
• Adjust the steering trim on the underside of the truck if it pulls to one side when driving straight.

5. Funktionen

• 1:14 All-Terrain Design: Built with sturdy ABS and a higher chassis to navigate various terrains like sand, mud, or concrete, both indoors and outdoors. Its rugged structure is collision-resistant.
• 2.4GHz Multi-Functional Remote: The non-interference 2.4GHz remote control allows multiple RC cars to race simultaneously within a 150ft range.
• Erweiterte Spielzeit: Equipped with a high-capacity 3.7V 500mAh battery and a USB charging cable for longer racing sessions.
• Langlebige Konstruktion: Features non-slipping rubber tires and dampers, providing a sturdy structure to withstand impacts and overturns.
• Integrierte LED-Leuchten: Front LED headlights enhance visibility and add to the driving experience in low-light conditions.

5.3. Produktvideo

6. Wartung

• Regularly inspect the truck for any loose parts or damage.
• Clean the truck after each use, especially after driving in dirt or mud, to prevent accumulation that could affect performance. Use a soft, dry cloth.
• Store the truck and remote controller in a cool, dry place away from direct sunlight and moisture.
• Remove batteries from both the truck and remote controller if storing for extended periods to prevent leakage.

7. Fehlerbehebung

• LKW reagiert nicht: Ensure both the truck and remote controller are powered on and properly paired. Check battery levels in both devices.
• Poor control range: Ensure there are no obstructions between the remote and the truck. Avoid areas with strong electromagnetic interference.
• Truck pulls to one side: Adjust the steering trim dial on the underside of the truck until it drives straight.
• Verminderte Leistung: Recharge the truck's battery. Ensure all moving parts are free from debris.

8. Spezifikationen

9. Garantie und Support

For warranty information, technical support, or any inquiries regarding your BEZGAR Remote Control Monster Truck, please refer to the contact information provided in your product packaging or visit the official BEZGAR webWebsite: www.bezgar.com.