VEVOR 5.3 Gallon 1.6 Peak HP 4-in-1 Wet/Dry Shop Vacuum Instruction Manual

Einführung

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your VEVOR 5.3 Gallon 1.6 Peak HP 4-in-1 Wet/Dry Shop Vacuum. This versatile appliance is designed for dry vacuuming, wet vacuuming, blowing, and spray cleaning, making it suitable for various cleaning tasks in homes, workshops, and vehicles. Please read this manual thoroughly before initial use and retain it for future reference.

Wichtige Sicherheitshinweise

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, or injury. Read all instructions before using this vacuum cleaner.

• Elektrische Sicherheit: Always connect to a properly grounded outlet. Do not modify the plug. Do not use with a damaged cord or plug. Keep the power cord away from heated surfaces.
• Allgemeine Bedienung: Do not leave the appliance unattended when plugged in. Unplug from outlet when not in use and before servicing. Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Handhabung von Flüssigkeiten: Do not pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Filterverwendung: Always ensure the correct filter is installed for the task (HEPA filter for dry, sponge filter for wet) to prevent damage to the motor and ensure effective cleaning.
• Wartung: Perform maintenance only when the vacuum is unplugged. Ensure all latches are securely fastened before operation.

Packungsinhalt

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, contact VEVOR customer service.

Image: The VEVOR 4-in-1 Wet/Dry Shop Vacuum shown with its main unit, hose, extension wand, floor brush, and various attachments including crevice tool, round brush, spray brush, carpet brush, and duckbill brush.

• Main Vacuum Unit (5.3 Gallon Tank)
• Hose (5 ft)
• Verlängerungsstab
• Bodenbürste
• Fugendüse
• Rundbürste
• Spray Brush
• Teppichbürste
• Duckbill Brush
• HEPA-Filter
• Schwammfilter
• Detergent Tank (1.1 Gallon)
• Netzkabel (14.8 m)
• Bedienungsanleitung

Aufstellen

Follow these steps to assemble your VEVOR Wet/Dry Shop Vacuum before first use.

Image: A detailed diagram illustrating the various components and features of the VEVOR shop vacuum, including its carry handle, power switch, cord wrap, blower port, latches, vacuum port, swivel wheels, power cord, hose, and control button.

1. Räder anbringen: Invert the main unit and securely attach the 360° swivel wheels to the base. Ensure they click into place or are fastened according to the specific model's design.
2. Schlauch anschließen: Insert the larger end of the hose into the vacuum port on the front of the main unit. Twist to secure it firmly.
3. Filter installieren:
   • Für Trockensaugen: Ensure the HEPA filter is properly installed over the motor cage inside the tank.
   • Für Nasssaugen: Remove the HEPA filter and install the sponge filter over the motor cage.
4. Attach Detergent Tank (for Spray Function): If using the spray function, fill the removable 1.1-gallon detergent tank with appropriate cleaning solution and attach it to the designated port on the side of the main unit. Connect the small clear tube from the detergent tank to the spray nozzle connection point on the vacuum.
5. Connect Attachments: Attach the desired extension wand and cleaning brush (e.g., floor brush, carpet brush, crevice tool) to the end of the hose.
6. Stromanschluss: Unwind the 14.8 ft power cord and plug it into a grounded electrical outlet.

Bedienungsanleitung

Your VEVOR Wet/Dry Shop Vacuum offers four distinct cleaning modes.

Image: A visual representation of the vacuum's four modes: dry cleaning for debris, wet cleaning for liquids, blowing for leaves, and spraying for deep cleaning, accompanied by images of the spray brush, carpet brush, duckbill brush, round brush, and floor brush.

Allgemeine Bedienung

• Ensure the vacuum is properly assembled and plugged in.
• Turn the ON/OFF switch located on the top of the unit to the 'ON' position to start the motor.
• To stop operation, turn the switch to the 'OFF' position.

1. Trockensaugen

Use this mode for picking up dry debris, dust, and dirt.

1. Stellen Sie sicher, dass der HEPA-Filter installiert ist.
2. Attach the appropriate dry cleaning brush (e.g., floor brush, round brush) to the hose.
3. Turn on the vacuum and move the attachment over the area to be cleaned.

2. Nasssaugen

Use this mode for picking up liquids and wet messes.

1. Remove the HEPA filter and install the sponge filter.
2. Attach a suitable wet pickup tool (e.g., squeegee attachment on the floor brush).
3. Turn on the vacuum and move the attachment over the liquid. The tank has a maximum fill line; do not overfill.

3. Gebläsefunktion

The vacuum can be used to blow away debris from hard-to-reach areas.

1. Den Schlauch vom Vakuumanschluss abziehen.
2. Insert the hose into the blower port located on the top of the unit.
3. Turn on the vacuum to activate the blower.

4. Sprühfunktion

This mode allows for applying cleaning solution and then vacuuming it up for deep cleaning.

1. Ensure the sponge filter is installed.
2. Füllen Sie den Reinigungsmitteltank mit der entsprechenden Reinigungslösung.
3. Attach the spray brush or carpet brush to the hose.
4. Turn on the vacuum. Press the touch button on the handle to activate the spray function, applying solution to the surface.
5. Release the button and move the brush over the wet area to vacuum up the dirty solution.

Wartung

Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Staubsaugers.

Image: An illustration highlighting the vacuum's dual-layer filtration system, featuring both a HEPA filter for dry debris and a sponge filter for wet applications. It also shows the large 5.3-gallon dust tank and the separate 1.1-gallon detergent tank.

Entleeren des Tanks

1. Ziehen Sie den Stecker des Staubsaugers aus der Steckdose.
2. Release the latches on the sides of the main unit and carefully lift off the motor head.
3. For dry debris, empty the dust tank into a waste receptacle. For wet waste, pour the liquid into a drain.
4. Clean the inside of the tank with water and mild detergent if necessary, then dry thoroughly before reassembly.

Filterreinigung und -austausch

• HEPA-Filter: For dry use, tap off loose dirt. If heavily soiled, rinse under running water and allow to air dry completely (24-48 hours) before reinstallation. Replace if damaged or if suction significantly decreases after cleaning.
• Schwammfilter: For wet use, rinse thoroughly with water and allow to air dry completely before storing or reusing.

Reinigungsmitteltank

• After using the spray function, empty any remaining cleaning solution from the 1.1-gallon detergent tank.
• Rinse the tank and spray nozzle thoroughly with clean water to prevent clogging.

Hose and Attachments

• Inspect the hose and attachments regularly for blockages or damage. Clear any obstructions.
• Wipe down attachments with a damp Tuch.

Fehlerbehebung

In diesem Abschnitt finden Sie häufig auftretende Probleme und deren Lösungen.

Technische Daten

Detailed technical specifications for the VEVOR 5.3 Gallon Wet Dry Vac.

Image: A diagram illustrating the physical dimensions of the VEVOR shop vacuum, including its height (20.5 inches / 52 cm), width (14.2 inches / 36 cm), and length (16.1 inches / 41 cm). The extension wand length (19.7-31.5 inches / 50-80 cm) is also shown, along with icons suggesting its use for sofas, cars, and floors.

Garantie und Support

VEVOR products are designed for durability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official VEVOR website. If you encounter any issues or require technical assistance, please contact VEVOR customer support through their official channels. Have your model number and purchase date ready when contacting support.