Einführung
This manual provides instructions for the safe and effective use of your Iaret Smart Watch USB Charging Cable. This cable is designed to provide reliable power to compatible smartwatches, specifically models I18 and I70, through a 2-pin, 2.5mm magnetic connector.
Produkt überview
Bild 1: The Iaret Smart Watch USB Charging Cable. This image displays the USB-A connector on one end and the 2-pin, 2.5mm magnetic charging head on the other, designed for smartwatches.
The Iaret Smart Watch USB Charging Cable features a standard USB-A connector for power input and a magnetic 2-pin, 2.5mm connector for output to your smartwatch. It is engineered for fast charging capabilities.
Kompatibilität
This charging cable is specifically designed for use with the following smartwatch models:
- Iaret I18 Smartwatch
- Iaret I70 Smartwatch
Ensure your smartwatch has a 2-pin, 2.5mm magnetic charging port for proper compatibility.
Installationsanweisungen
- Überprüfen Sie das Kabel: Before first use, visually inspect the charging cable for any signs of damage, such as frayed wires or bent pins. Do not use if damaged.
- An Stromquelle anschließen: Insert the USB-A end of the charging cable into a compatible USB power adapter (e.g., wall charger, computer USB port, power bank). Ensure the power source provides stable 5V output.
- Smartwatch vorbereiten: Locate the charging port on your Iaret I18 or I70 smartwatch. Ensure the port is clean and free of debris.
- An Smartwatch anbringen: Align the magnetic 2-pin connector of the cable with the charging contacts on your smartwatch. The magnets will help guide the connector into the correct position. A secure connection is indicated by the cable snapping firmly into place.
Operating Instructions (Charging)
Once the cable is properly connected to both a power source and your smartwatch:
- Verbindung überprüfen: Confirm that the charging icon or indicator appears on your smartwatch screen, signifying that charging has begun.
- Ladezeit: Charging times may vary depending on the smartwatch model and its current battery level. Refer to your smartwatch's manual for specific charging duration estimates.
- Trennen der Verbindung: Once your smartwatch is fully charged, gently pull the magnetic connector away from the smartwatch. Then, disconnect the USB-A end from the power source.
Notiz: Avoid leaving the smartwatch connected to the charger for extended periods after it is fully charged to prolong battery life.
Wartung
- Reinigung: Use a soft, dry cloth to clean the cable and its connectors. Do not use liquid cleaners or abrasive materials.
- Lagerung: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable sharply to prevent internal damage.
- Handhabung: Fassen Sie beim Ein- und Ausstecken des Kabels immer die Stecker an, anstatt am Kabel selbst zu ziehen.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Smartwatch lädt nicht. |
|
|
| Langsamer Ladevorgang. |
|
|
| Das Kabel scheint beschädigt zu sein. | Physische Belastung oder Abnutzung. | Discontinue use immediately and replace the cable. |
Technische Daten
- Marke: Iaret
- Modellnummer: I18-CC
- Steckertyp: USB-A (input), 2-Pin 2.5mm Magnetic (output)
- Kabeltyp: USB
- Kompatible Geräte: Iaret I18, Iaret I70 Smart Watches
- Besonderheit: Schnelles Laden
- Anschluss Geschlecht: Mann-zu-Mann
- Anzahl der Pins: 2
- Artikelgewicht: 0.317 Unzen (ca. 9 Gramm)
- Paketabmessungen: 2.52 x 1.54 x 0.47 Zoll
Garantie und Support
Iaret products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the official Iaret webBesuchen Sie unsere Website oder kontaktieren Sie den Kundenservice über Ihre Verkaufsstelle. Bitte bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.