TP-Link TL-SG1210MPE 8-Port Gigabit Easy Smart PoE+ Switch User Manual

1. Einleitung

This manual provides instructions for the installation, configuration, and operation of the TP-Link TL-SG1210MPE 8-Port Gigabit Easy Smart PoE+ Switch. This device is designed to provide a flexible and cost-effective solution for expanding your network, offering Power over Ethernet (PoE+) capabilities for compatible devices.

2. Packungsinhalt

Verify the package contains the following items:

• TL-SG1210MPE Switch
• Netzteil
• Installationshandbuch

If any item is missing or damaged, please contact your reseller.

3. Produktüberschreitungview

3.1 Frontplatte

The front panel of the TL-SG1210MPE features LED indicators for status monitoring and the network ports.

Bild: Vorderseite view of the TL-SG1210MPE switch, displaying the TP-Link logo, model number, and a row of LED indicators above the network ports.

LED-Anzeigen:

• Leistung: Zeigt den Stromstatus des Switches an.
• PoE-Max: Lights up when the total PoE power consumption is near its maximum limit.
• Link/Act (for RJ45 ports): Indicates a network connection and activity.
• PoE Status (for PoE ports): Zeigt den PoE-Stromversorgungsstatus an.
• Delivering Power (for PoE ports): Indicates that the port is actively supplying power to a PoE device.
• PoE Fault (for PoE ports): Indicates a PoE fault condition, such as overcurrent or short circuit.

3.2 Rückseite

The rear panel includes the power input and all network connectivity ports.

Bild: Rückseite view of the TL-SG1210MPE switch, showing the power input, eight Gigabit RJ45 ports (PoE+), two Gigabit Non-PoE RJ45 ports (Uplink), and one Gigabit Combo SFP/RJ45 slot. Dimensions are also indicated.

Häfen:

• Leistungsaufnahme: Schließen Sie hier das mitgelieferte Netzteil an.
• 8x PoE+ (802.3at/af) 10/100/1000 Mbps RJ45 Ports: These ports provide up to 30W per port, with a total PoE power budget of 123W, for powering compatible devices like IP cameras, IP phones, and wireless access points.
• 2x Gigabit Non-PoE RJ45 Ports (Uplink): Standard Gigabit Ethernet ports for connecting to your router or other network devices.
• 1x Gigabit Combo SFP Slot: A flexible slot that can be used with either an SFP module for fiber optic connections or an RJ45 connector for copper Ethernet.

4. Einrichtungsanweisungen

The TL-SG1210MPE switch is designed for easy setup. Follow these steps to get your network running:

1. An die Stromversorgung anschließen: Connect the provided power adapter to the switch's power input and then to a power outlet. Ensure the Power LED on the front panel illuminates.
2. Netzwerkgeräte verbinden:
   • For PoE-powered devices (e.g., IP cameras, IP phones, access points), connect them to any of the 8 PoE+ RJ45 ports (ports 1-8).
   • For non-PoE devices or uplink connections to your router/main network, use the 2 Gigabit Non-PoE RJ45 ports (Uplink ports) or the SFP slot.
3. Überprüfen Sie die Verbindungen: Check the Link/Act and PoE Status LEDs for connected devices. A solid Link/Act LED indicates a successful connection, and a lit PoE Status LED indicates power delivery.

Image: A three-step diagram illustrating the simple setup process: 1) Connect to Power, 2) Connect Devices (IP camera, IP phone, access point, and internet router), and 3) Enjoy.

4.1 Easy Smart Management

The TL-SG1210MPE is an Easy Smart Managed switch, allowing for advanced configuration via a web-based management interface. Refer to the official TP-Link website for detailed instructions on accessing and configuring the management interface for features like VLAN, QoS, IGMP, and LAG.

5. Bedienungsanleitung

5.1 Power over Ethernet (PoE)-Funktionalität

The switch automatically detects and supplies power to 802.3af/at compliant PoE-powered devices (PDs) connected to its PoE+ ports. This simplifies deployment by eliminating the need for separate power cables for devices like IP cameras and wireless access points.

Image: Diagram illustrating the TL-SG1210MPE switch providing both data and power to an IP camera, IP phone, and Wi-Fi access point over a single Ethernet cable.

5.2 PoE Auto Recovery

The switch supports PoE Auto Recovery, which automatically detects and reboots unresponsive PoE-powered devices. This feature helps maintain network stability and reduces the need for manual intervention. This feature may require configuration through the web Verwaltungsschnittstelle.

Image: A visual representation of PoE Auto Recovery, showing an unresponsive IP camera being detected and automatically rebooted by the switch to restore functionality.

5.3 Erweiterte Funktionen

Durch die web-based management interface, users can configure advanced network features:

• VLAN (Virtuelles lokales Netzwerk): Segmentieren Sie Ihr Netzwerk, um Sicherheit und Leistung zu verbessern.
• QoS (Dienstqualität): Priorisieren Sie den Netzwerkverkehr, um sicherzustellen, dass kritische Anwendungen über ausreichend Bandbreite verfügen.
• IGMP-Snooping: Optimize multicast traffic delivery, useful for IPTV and other streaming services.
• LAG (Link Aggregation Group): Mehrere physische Verbindungen werden zu einer einzigen logischen Verbindung zusammengefasst, um die Bandbreite und Redundanz zu erhöhen.

6. Wartung

Um eine optimale Leistung und Langlebigkeit Ihres Schalters zu gewährleisten:

• Bewahren Sie den Schalter an einem gut belüfteten Ort auf, um eine Überhitzung zu vermeiden.
• Vermeiden Sie es, den Schalter extremen Temperaturen, hoher Luftfeuchtigkeit oder direkter Sonneneinstrahlung auszusetzen.
• Clean the device periodically with a dry, soft cloth. Do not use liquid or aerosol cleaners.
• Überprüfen Sie regelmäßig den TP-Link webWebsite für Firmware-Updates, um die neuesten Funktionen und Sicherheitspatches zu gewährleisten.

7. Fehlerbehebung

If you encounter issues with your TL-SG1210MPE switch, refer to the following common troubleshooting tips:

• Kein Strom: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check if the Power LED is illuminated.
• Keine Verknüpfung/Aktivität: Verify that Ethernet cables are properly connected to both the switch and the network device. Ensure the connected device is powered on and functioning correctly. Try a different cable or port.
• PoE-Gerät schaltet sich nicht ein: Check if the device is PoE-compatible (802.3af/at). Ensure the cable length does not exceed 100 meters. Verify the total PoE power budget (123W) is not exceeded by all connected PoE devices. Check the PoE Status and PoE Fault LEDs.
• Kein Zugriff möglich Web Verwaltungsschnittstelle: Ensure your computer is on the same network segment as the switch. Verify the switch's IP address and your computer's IP settings. Refer to the Installation Guide for default IP address and login credentials.
• Netzwerkleistungsprobleme: Check for excessive network traffic or loops. Consider configuring QoS or VLANs if applicable.

8. Spezifikationen

9. Garantieinformationen

The TP-Link TL-SG1210MPE switch comes with a 3 Jahr Herstellergarantie. For detailed warranty terms, conditions, and registration information, please visit the official TP-Link webWebsite oder wenden Sie sich an den Kundendienst.

10. Technischer Support

For further assistance or technical inquiries, please contact TP-Link support:

• Telefon: (866) 225-8139
• Unterstützung WebWebsite: myproducts.tp-link.com/us
• E-Mail: support.USA@tp-link.com