Einführung
Thank you for choosing the realme Techlife Robot 2-in-1 Vacuum Cleaner with Mopping. This device is designed to provide efficient and convenient floor cleaning with advanced features. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance of your robot vacuum cleaner.
The realme Techlife Robot 2-in-1 Vacuum Cleaner, showcasing sein schlankes Design und seine kompakte Form.
Sicherheitshinweise
Before using the appliance, please read this user manual carefully and keep it for future reference. This device is intended for indoor use only. Do not use it in commercial or industrial environments. Ensure the charging dock is placed on a flat surface against a wall, with no obstacles within 1 meter in front and 0.5 meters on either side. Keep the device away from water and moisture. Do not allow children or pets to play with the device. Always supervise children when the device is in operation. Do not use the device to clean liquids, burning objects, or sharp objects. Regularly check the brushes and wheels for tangled hair or debris.
Packungsinhalt
Prüfen Sie beim Auspacken, ob alle Artikel vorhanden und in gutem Zustand sind.
- realme Techlife Robot Vacuum Cleaner
- Ladestation
- Netzteil
- Wassertank
- Fernbedienung
- Seitenbürsten (2 Paar)
- Hauptbürste
- Reinigungswerkzeug
- Bedienungsanleitung
Produkt überview
Spitze View
Die Spitze view of the robot vacuum, showing the power button and LiDAR sensor housing.
The top of the robot features the LiDAR navigation sensor for accurate mapping and navigation, along with control buttons for starting/pausing cleaning and returning to the charging dock.
Unten View
The underside of the robot vacuum, displaying the main brush, side brushes, and wheels.
The bottom of the robot includes the main rolling brush, two side brushes for edge cleaning, driving wheels, and cliff sensors to prevent falls.
Aufstellen
1. Platzierung der Ladestation
Place the charging dock against a wall on a hard, level surface. Ensure there are no obstacles within 1 meter (3 feet) in front of the dock and 0.5 meters (1.5 feet) on either side to allow the robot to easily dock and undock.
2. Erstes Aufladen
Connect the power adapter to the charging dock and plug it into a wall outlet. Place the robot onto the charging dock. The robot will automatically begin charging. For first-time use, ensure the robot is fully charged (approximately 6 hours) before its initial cleaning cycle. The 5200mAh battery provides up to 300 minutes of cleaning time on a full charge.
3. App Connection (realme Link App)
- Laden Sie die realme Link App aus dem App Store Ihres Smartphones.
- Erstellen Sie ein Konto oder melden Sie sich an.
- Follow the in-app instructions to add your realme Techlife Robot Vacuum Cleaner. This typically involves turning on the robot, resetting its Wi-Fi, and connecting to your home Wi-Fi network.
- Sobald die Verbindung hergestellt ist, können Sie den Roboter steuern. view cleaning maps, set schedules, and adjust cleaning modes remotely.
Bedienungsanleitung
1. Starten eines Reinigungszyklus
Press the power button on the robot or use the realme Link app to start a cleaning cycle. The robot will use its advanced LiDAR navigation technology to map your home and plan an efficient cleaning path.
The robot vacuum actively cleaning a hard floor surface in a modern living space.
2. Reinigungsmodi
The robot offers 4 cleaning modes, which can be selected via the app or remote control:
- Automatische Reinigung: Der Roboter reinigt den gesamten Bereich intelligent.
- Fleckenreinigung: Reinigt einen bestimmten Bereich intensiver.
- Kantenreinigung: Schwerpunkt ist die Reinigung entlang von Wänden und Möbelkanten.
- Geplante Reinigung: Legen Sie bestimmte Zeiten fest, zu denen der Roboter automatisch reinigen soll.
The 3000Pa strong suction power ensures effective removal of dust and debris across various floor types.
3. Wischfunktion
To use the mopping function, fill the intelligent water tank with clean water and attach it to the robot. The robot features 4 water output modes, allowing you to adjust water flow based on floor surface and cleaning requirements. The Y-shape cleaning path is specifically designed for effective mopping.
The robot vacuum performing its mopping function on a hard floor, demonstrating its 2-in-1 capability.
4. Intelligente Funktionen
- realme Link App Control: Control cleaning force, schedule tasks, and monitor progress in real-time.
- Mehrgeschossige Kartierung: The robot can build and memorize maps for multiple floors, improving cleaning efficiency.
- Kompatibilität mit Sprachassistenten: Supports Google Assistant and Alexa for convenient voice control.
The robot vacuum navigating and cleaning under furniture, highlighting its low-profile Design.
Wartung
Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihres Saugroboters.
1. Entleeren des Staubbehälters
Open the top cover of the robot and remove the dust box. Empty its contents into a trash bin. Clean the filter regularly by tapping it gently to remove dust. Rinse the dust box with water if necessary, ensuring it is completely dry before reinserting.
2. Reinigung der Hauptbürste
Remove the main brush cover and lift out the main brush. Use the provided cleaning tool to cut and remove any tangled hair or debris. Reinstall the main brush and cover.
3. Seitenbürsten reinigen
Periodically check the side brushes for wear or entanglement. Remove any hair or debris. If brushes are damaged, replace them with new ones.
4. Cleaning the Water Tank and Mopping Pad
After each mopping session, empty any remaining water from the tank. Remove and clean the mopping pad. Wash the mopping pad thoroughly and allow it to air dry completely before reuse.
5. Reinigung der Sensoren und Ladekontakte
Wipe the cliff sensors, wall sensors, and charging contacts on both the robot and the charging dock with a clean, dry cloth to ensure proper function.
Fehlerbehebung
Sollten Sie Probleme mit Ihrem Saugroboter haben, beachten Sie bitte die folgenden gängigen Lösungsansätze:
- Roboter lädt nicht: Stellen Sie sicher, dass die Ladestation eingeschaltet ist und die Ladekontakte des Roboters sauber und korrekt mit der Ladestation ausgerichtet sind.
- Roboter steckt fest oder navigiert unberechenbar: Clear any obstacles, loose cables, or rugs that may be impeding movement. Clean the sensors.
- Schlechte Saugleistung: Empty the dust box, clean the filter, and check the main brush for blockages.
- Mopping not working: Ensure the water tank is filled, properly installed, and the mopping pad is attached. Check water output settings in the app.
- Probleme mit der App-Verbindung: Ensure your robot and smartphone are connected to the same 2.4GHz Wi-Fi network. Restart the robot and your router if necessary.
- Ungewöhnliches Geräusch: Check the main brush, side brushes, and wheels for any foreign objects or debris.
For persistent issues, consult the realme Link app for further diagnostics or contact customer support.
Technische Daten
| Besonderheit | Spezifikation |
|---|---|
| Marke | realme |
| Modellname | 6941399050860 |
| Besonderheit | LiDAR Navigation, Smart |
| Farbe | Schwarz |
| Technische Daten | 33L x 33B x 7H Zentimeter |
| Akkulaufzeit | 100 Minutes (Mopping), 300+ Minutes (Vacuuming) |
| Batteriekapazität | 5200 mAh |
| Saugleistung | 3000Pa |
| Staubbehälter Kapazität | 0.3 Liter |
| Kontrollmethode | Remote, App (realme Link), Voice (Google Home, Alexa) |
| Geräuschpegel | Bis zu 55 dB |
| Hersteller | Realme |
Garantie und Support
Your realme Techlife Robot 2-in-1 Vacuum Cleaner is covered by a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, service, or inquiries, please visit the official realme support webBesuchen Sie die Website oder kontaktieren Sie die Kundendienst-Hotline. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für Garantieansprüche auf.
