Solid State Logic SSL2 2-In/2-Out USB-C Audio-Interface – Benutzerhandbuch

1. Einleitung

The Solid State Logic SSL2 is a high-performance 2-in/2-out USB-C audio interface designed for musicians, producers, and content creators. It features class-leading microphone preamps, 24-bit/192 kHz AKM converters, and a unique Legacy 4K analog enhancement mode inspired by classic SSL 4000 series consoles. This manual provides essential information for setting up, operating, and maintaining your SSL2 interface.

Abbildung 1: Vorderseite view of the Solid State Logic SSL2 Audio Interface.

2. Einrichtung

2.1 Systemanforderungen

• Operating System: Windows 10 or higher (64-bit), macOS 10.15 (Catalina) or higher.
• USB 2.0 compatible port (USB-C for direct connection, USB-A with adapter).
• Internet connection for driver and software bundle download.

2.2 Treiber- und Softwareinstallation

1. Visit the Solid State Logic website (solidstatelogic.com/support) to download the latest drivers for your operating system.
2. Installieren Sie die Treiber gemäß den Anweisungen auf dem Bildschirm.
3. Register your SSL2 to access the included SSL Production Pack software bundle, which typically includes DAWs, plugins, und soamples.

2.3 Hardware-Anschluss

Connect the SSL2 to your computer using the supplied USB-C cable. The interface is bus-powered, meaning it draws power directly from your computer via the USB connection. Connect your microphones, instruments, and monitors as described below.

Figure 2: Rear panel connections of the Solid State Logic SSL2 Audio Interface.

3. Operating the SSL2

3.1 Bedienelemente auf der Vorderseite

Figure 3: Close-up of SSL2 front panel controls.

• Input Channels 1 & 2: Each channel features an XLR/TRS combo jack for microphones or line-level instruments.
• +48V Phantomspeisung: Aktiviert die Phantomspeisung für Kondensatormikrofone.
• Line/Inst Switch: Toggles between line-level and instrument-level input impedance.
• Verstärkungsregler: Adjust the input gain for each channel. Monitor the input level using the LED meters.
• Legacy 4K Button: Engages the 4K analog enhancement, adding a subtle high-frequency boost and harmonic distortion inspired by classic SSL consoles.
• Monitorebene: Large central knob controls the overall output level to your studio monitors.
• Monitor-Mix: Blends the input signal with the USB playback from your computer for zero-latency monitoring.
• Kopfhörerstufe: Dedicated knob for adjusting the headphone output volume.

3.2 Anschlüsse auf der Rückseite

• USB-C-Anschluss: Verbindet sich mit Ihrem Computer für Daten- und Stromversorgung.
• Kensington Schloss: Zur Sicherung des Geräts.
• Monitor Outputs (L/R): Balanced TRS outputs for connecting to studio monitors.
• Eingänge 1 und 2: XLR/TRS combo jacks for connecting microphones or line-level instruments.

4. Funktionen

• Class-Leading Mic Preamps: Two high-quality microphone preamps offering 130.5dB EIN and 62dB of gain for pristine audio capture.
• Pro-Studio Quality Components: Equipped with Neutrik connectors and Alps pots for durability and reliable performance.
• High Current Headphone Amp: Provides clear and powerful headphone monitoring.
• 24-bit / 192 kHz AKM Converters: Ensures high-fidelity audio conversion for recording and playback.
• Legacy 4K Analog Enhancement: Instantly adds a touch of classic SSL 4000 series console character to your recordings.
• SSL Production Pack: An exclusive software bundle included with your purchase, featuring various DAWs, plugins, und soamples to kickstart your production.

Figure 4: The SSL Production Pack software bundle.

5. Spezifikationen

6. Wartung

• Reinigung: Use a soft, dry cloth to clean the exterior of the interface. Avoid liquid cleaners or abrasive materials.
• Lagerung: Bewahren Sie das Gerät an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
• Kabelmanagement: Stellen Sie sicher, dass alle Kabel fest angeschlossen und nicht unter Spannung stehen, um Beschädigungen an Anschlüssen oder Kabeln zu vermeiden.
• Software-Updates: Überprüfen Sie regelmäßig die Halbleiterlogik. website for firmware and driver updates to ensure optimal performance and compatibility.

7. Fehlerbehebung

• Kein Strom/keine Verbindung: Ensure the USB-C cable is securely connected to both the SSL2 and your computer. Try a different USB-C port or cable.
• Kein Ton:
  • Check monitor and headphone levels.
  • Verify the Monitor Mix knob is set correctly (between Input and USB).
  • Ensure the SSL2 is selected as the audio input/output device in your computer's sound settings and your DAW.
  • Confirm drivers are installed correctly.
• Verzerrter Klang:
  • Reduce input gain to prevent clipping (red LEDs on the meter).
  • Prüfen Sie auf fehlerhafte Kabel oder Verbindungen.
  • Stellt sicherample rates match between your DAW and the SSL2 settings.
• Phantomspeisung funktioniert nicht: Ensure the +48V button is engaged for the correct channel.

8. Garantie und Support

The Solid State Logic SSL2 is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Solid State Logic webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundendienst. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.