Einführung
This manual provides essential information for the safe and effective use of your Powertec Leg Press Machine. Designed for home gym use, this heavy-duty equipment is built to help you build strength, stamina, and muscle mass in your lower body. Please read this manual thoroughly before assembly and operation to ensure proper usage and longevity of your machine.
Image: The Powertec Leg Press Machine, ready for use.
Sicherheitshinweise
- Konsultieren Sie einen Arzt, bevor Sie mit einem Trainingsprogramm beginnen.
- Vor jedem Gebrauch sicherstellen, dass alle Schrauben und Muttern fest angezogen sind.
- Do not exceed the maximum weight capacity of 1000 LB.
- Always use the dual safety catches provided for secure heavy lifting.
- Halten Sie Kinder und Haustiere während des Betriebs von der Maschine fern.
- Perform exercises with controlled movements; avoid sudden jerks.
- Inspect the machine regularly for any signs of wear or damage. Do not use if damaged.
- Maintain a clear space around the machine for safe operation.
Packungsinhalt
Your Powertec Leg Press Machine package should include the following components:
- Hauptrahmenkomponenten
- Leg Press Sled Assembly
- Verstellbare Rückenlehne und Sitzfläche
- Stainless Steel Weight Horns (4)
- Large Foot Plate
- Hardware-Set (Schrauben, Muttern, Unterlegscheiben, Werkzeuge)
- Benutzerhandbuch (dieses Dokument)
Note: Weight plates are not included with the machine.
Einrichtung und Montage
Assembly of the Powertec Leg Press Machine requires careful attention to detail. It is recommended to have assistance during certain steps due to the size and weight of components. All necessary hardware is provided and organized for ease of assembly.
- Komponenten auspacken: Carefully remove all parts from the packaging and lay them out. Verify all components listed in the 'Package Contents' section are present.
- Hauptrahmen montieren: Connect the main frame sections using the provided bolts and nuts. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.
- Install Sled Rails: Attach the chrome-plated sled rails to the main frame. These rails provide the smooth movement for the leg press sled.
- Sitz und Rückenlehne anbringen: Secure the adjustable backrest and seat to the frame. The backrest angle can be adjusted using the yellow lever at the rear of the seat assembly.
- Mount Foot Plate and Weight Horns: Attach the large diamond-plated foot plate to the sled assembly. Install the four stainless steel weight horns onto the designated positions on the sled.
- Abschließendes Anziehen: Once all components are in place, systematically tighten all bolts and nuts across the entire machine.
- Funktionsprüfung: Before loading weights, test the sled's movement along the rails and ensure the safety catches engage properly.
Eine visuelle Anleitung finden Sie im folgenden Montagevideo:
Video: Powertec Leg Press In Real Home Gym - Demonstrates the assembled machine and some operational aspects.
Bedienungsanleitung
The Powertec Leg Press Machine is designed for effective lower body workouts, targeting quadriceps, glutes, hamstrings, and calves.
Ladegewichte:
The machine features four weight horns for loading standard Olympic plates. To load weights on the lower horns, you may need to slightly lower the sled to clear the support bar. Once loaded, push the sled back up to engage the safety catches.
Image: A user loading weight plates onto the machine's weight horns.
Einstellen der Rückenlehne:
The backrest can be adjusted to different angles to accommodate various user heights and exercise preferences. Locate the yellow adjustment lever at the rear of the seat assembly, pull it out, adjust the backrest to your desired position, and release the lever to lock it in place.
Bild: Detailliert view of the adjustable backrest mechanism on the Powertec Leg Press Machine.
Performing a Leg Press:
- Sit comfortably on the seat with your back firmly against the backrest.
- Place your feet shoulder-width apart on the foot plate, ensuring your heels are flat.
- Grasp the handles on either side of the seat for stability.
- Push the foot plate upwards to disengage the safety catches. Rotate the safety levers downwards to unlock the sled.
- Slowly lower the foot plate by bending your knees, ensuring your lower back remains pressed against the backrest. Do not allow your hips to lift off the seat.
- Push the foot plate back to the starting position, extending your legs without locking your knees.
- Upon completion of your set, push the foot plate up to engage the safety catches and rotate the safety levers upwards to lock the sled.
Image: User demonstrating proper form on the Powertec Leg Press Machine.
Wartung
Regular maintenance will ensure the longevity and safe operation of your Powertec Leg Press Machine.
- Reinigung: Wischen Sie die Maschine mit Anzeige abamp Nach jedem Gebrauch mit einem Tuch abwischen, um Schweiß und Staub zu entfernen. Scheuermittel vermeiden.
- Schmierung: Periodically apply a silicone-based lubricant to the chrome-plated guide rods to ensure smooth sled movement.
- Bolzenprüfung: Regularly inspect all bolts and nuts for tightness. Re-tighten as necessary to prevent loosening during use.
- Komponenteninspektion: Check the padding, grips, and wheels for any signs of wear, tears, or damage. Replace worn parts promptly.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Sled movement is not smooth. | Lack of lubrication on guide rods; debris on rails. | Clean guide rods and apply silicone lubricant. Check for obstructions. |
| Die Maschine wirkt instabil oder wackelig. | Lose Schrauben oder ungleichmäßige Montage. | Check and tighten all assembly bolts. Ensure machine is on a level surface. |
| Safety catches do not engage properly. | Fehlausrichtung oder Blockierung. | Inspect the safety catch mechanism for any foreign objects or damage. Ensure proper sled alignment. |
Technische Daten
- Modellname: Beinpresse
- Modellnummer: P-LP19
- Farbe: Schwarz
- Material: Stainless Steel (weight horns), Commercial Grade Padding
- Artikelabmessungen (L x B x H): 79 x 36.6 x 54 Zoll
- Artikelgewicht: Ungefähr 258 Pfund
- Maximale Gewichtskapazität: Bis zu 1000 Pfund
- Hauptmerkmale: Revolutionary roller system with nylon-reinforced wheels, adjustable backrest, dual safety catches.
Garantie und Support
Powertec stands behind the quality of its products. All Powertec machines are covered under the following warranty to the original registered purchaser and for home use ONLY:
- Eingeschränkte lebenslange Garantie: On the frame (excludes surface finish).
- Five Years Warranty: On moving frame parts (excludes surface finish).
- Zwei Jahre Garantie: On component parts (bearings, spring pins, and hardware).
- Ein Jahr Garantie: On pads, grips, and any other wear/tear parts.
For customer support or warranty claims, please contact Powertec Fitness directly. You can also visit the official Powertec Store on Amazon for more information and assistance: Powertec Amazon Store.
