1. Einleitung
This manual provides detailed instructions for the installation, maintenance, and general information regarding the Sharp SJF79PS-SL refrigerator lower right door stopper hook. This component is a genuine replacement part designed to ensure the proper closing and alignment of your refrigerator door.
2. Sicherheitshinweise
Please read and understand all safety precautions before attempting any installation or maintenance. Failure to do so may result in injury or damage to your appliance.
- Stromversorgung trennen: Always unplug the refrigerator from the power outlet before beginning any repair or installation work.
- Vorsichtig handhaben: Components may have sharp edges. Wear appropriate protective gloves if necessary.
- Richtiges Werkzeug: Use only the correct tools for the job to avoid damaging the part or the refrigerator.
- Professionelle Hilfe: Wenn Sie sich bei einem Arbeitsschritt unsicher sind, konsultieren Sie einen qualifizierten Techniker.
3. Einrichtung (Installation)
Follow these steps to replace the lower right door stopper hook on your Sharp SJF79PS-SL refrigerator.
- Bereiten Sie den Bereich vor: Ensure the refrigerator door is open and stable. You may need to support the door if removing other components.
- Locate the Old Stopper: Identify the existing lower right door stopper hook. It is typically located at the bottom corner of the refrigerator door frame.
- Remove the Old Stopper: Carefully unclip or unscrew the old stopper. Note how it was attached for reinstallation.
- Install the New Stopper: Align the new Sharp SJF79PS-SL door stopper hook in the correct position. Secure it by clipping it into place or fastening any screws that were removed. Ensure it is firmly seated and does not wobble.
- Türprüfung: Gently close the refrigerator door to ensure the new stopper allows for smooth and proper closure without obstruction.

Figure 1: The Sharp SJF79PS-SL refrigerator door stopper hook. This image displays the grey plastic component, clearly showing the molded text ">POM< A192" and a "100% ORIGINAL" stamp, indicating its material and authenticity. The design includes a hook mechanism and mounting points.
4. Betrieb
The Sharp SJF79PS-SL refrigerator door stopper hook is a passive mechanical component. Its operation is automatic and integrated into the door's closing mechanism. Once correctly installed, it functions by providing a physical stop or guide for the refrigerator door, ensuring it closes properly and aligns with the main body of the appliance. No user interaction is required for its operation after installation.
5. Wartung
Regular maintenance of the door stopper hook is minimal but important for its longevity and proper function.
- Reinigung: Periodically wipe the stopper with a soft, damp Mit einem Tuch Staub oder Schmutz entfernen. Scheuermittel vermeiden.
- Inspektion: Occasionally inspect the stopper for any signs of wear, cracks, or damage. Ensure it remains securely attached to the door.
- Schmierung: No lubrication is required for this component.
6. Fehlerbehebung
If you experience issues with your refrigerator door after installing the stopper, consider the following:
- Tür schließt nicht richtig:
- Check if the stopper is fully seated and securely attached.
- Stellen Sie sicher, dass keine Hindernisse das Schließen der Tür verhindern.
- Verify that the stopper is correctly aligned with its counterpart on the refrigerator body.
- Stopper Feels Loose:
- Re-check the attachment points. If it uses screws, ensure they are tightened. If it clips on, ensure all clips are engaged.
- If the mounting point on the refrigerator door is damaged, the stopper may not hold securely.
Sollten die Probleme weiterhin bestehen, wenden Sie sich bitte an den Kundendienst oder einen qualifizierten Techniker.
7. Spezifikationen
| Teilename | Refrigerator Door Stopper Hook |
| Modellkompatibilität | Sharp SJF79PS-SL (and potentially other compatible Sharp models) |
| Material | High-quality durable plastic (indicated by ">POM<" marking) |
| Position | Lower Right Refrigerator Door |
| Farbe | Grau |
8. Garantie und Support
This genuine Sharp replacement part is designed for durability and performance. For information regarding warranty coverage, please refer to the original refrigerator's warranty documentation or contact Sharp customer service directly.
For technical support or further assistance with installation, please visit the official Sharp support website or contact their customer service hotline. Ensure you have your refrigerator model number (SJF79PS-SL) and the part details ready when contacting support.
Sharp Official WebWebsite: www.sharp.eu (oder relevante regionale webWebsite)





