Neomitis RT7 RF+ Wireless 7 Day Programmable Room Thermostat

Einführung

This instruction manual provides detailed guidance for the installation, operation, and maintenance of your Neomitis RT7 RF+ Wireless 7 Day Programmable Room Thermostat. This device is designed to provide efficient and flexible control over your heating system, ensuring optimal comfort and energy savings. Please read this manual thoroughly before installation and use to ensure correct and safe operation.

Aufstellen

Packungsinhalt

Vor Beginn der Installation überprüfen Sie bitte, ob alle Komponenten im Paket vorhanden sind:

• RT7 RF+ Programmable Room Thermostat Unit
• Drahtlose Empfängereinheit
• Wandhalterung
• Drahtlose Antenne
• Befestigungsschrauben und Dübel
• Bedienungsanleitung (dieses Dokument)

Installation

Installation should be carried out by a qualified electrician or heating engineer. Ensure the main power supply to the heating system is switched off before commencing any wiring.

1. Receiver Unit Placement: Mount the wireless receiver unit near the boiler or wiring center. Ensure it is not obstructed by large metal objects that could interfere with the wireless signal.
2. Anschluss des Empfängers: Connect the receiver unit to your boiler according to the wiring diagram provided in the separate installation guide. The receiver typically requires a permanent live, neutral, and a switched live connection to control the boiler.
3. Thermostat Unit Placement: Choose a suitable location for the thermostat unit, away from direct sunlight, draughts, or heat sources (e.g., radiators, lamps). An internal wall at approximately 1.5 meters from the floor is ideal.
4. Einlegen der Batterie: Insert the required batteries into the thermostat unit. Ensure correct polarity.
5. Paarung (falls erforderlich): The units are usually pre-paired. If not, follow the pairing instructions in the separate installation guide, typically involving pressing a button on both the receiver and thermostat.
6. Einschalten: Restore power to the heating system. The receiver unit should indicate its status (e.g., LED lights).

Image: The Neomitis RT7 RF+ Wireless Thermostat (left) with its digital display and rotary dial, alongside the wireless receiver unit (right) showing 'Override' and 'RF Test' buttons.

Bedienungsanleitung

Grundlegende Bedienung

• Anzeige: The main display shows the current room temperature and the set temperature.
• Wählscheibe: Turn the rotary dial to adjust the set temperature. The new setting will be displayed temporarily.
• Override-Funktion: Press the rotary dial to temporarily override the current program. This allows you to manually set a temperature for a specific period.
• Heizanzeige: A flame icon or similar symbol on the display indicates when the heating system is active.

Programmierung

The RT7 RF+ allows for 7-day programmable heating schedules. Refer to the detailed programming section in the separate user guide for step-by-step instructions on setting time periods and temperatures for each day of the week.

• Accessing Program Mode: Typically involves pressing and holding the rotary dial or a dedicated button.
• Uhrzeit und Tag einstellen: Ensure the current time and day are correctly set for accurate programming.
• Setting Temperature Periods: Define up to 6 temperature periods per day, each with a start time and a desired temperature.
• Copying Programs: Some models allow copying programs from one day to another to simplify setup.

Wartung

Reinigung

Clean the thermostat unit regularly with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic casing und elektronische Bauteile.

Batteriewechsel

The thermostat unit is battery-powered. When the battery low indicator appears on the display, replace the batteries promptly to ensure continuous operation. Use high-quality alkaline batteries of the specified type (refer to specifications section). Dispose of old batteries responsibly.

Fehlerbehebung

Technische Daten

Garantie und Support

Neomitis products are manufactured to high standards and are subject to rigorous quality control. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Neomitis webAuf der Webseite finden Sie die detaillierten Garantiebedingungen.

For technical support, troubleshooting assistance, or to inquire about spare parts, please contact Neomitis customer service. Contact details can typically be found on the Neomitis webauf der Website oder auf der Produktverpackung.

Online-Ressourcen: For the most up-to-date information, FAQs, and additional support documents, please visit the official Neomitis webWebsite.

Wichtige Hinweise

Sicherheit: Always disconnect the main power supply before performing any installation or maintenance on the heating system or receiver unit. Only qualified personnel should undertake electrical wiring.

Entsorgung: At the end of its life, dispose of the product and its batteries responsibly, in accordance with local regulations for electronic waste and battery recycling.

Videoinhalt: Vom Verkäufer standen keine offiziellen Produktvideos zur Verfügung, die in dieses Handbuch aufgenommen werden konnten.