1. Einleitung
The HID Global RP10-H (Model: 900PHRNEK00466) is a versatile multi-technology access control reader designed for secure identification. This reader supports various credential technologies including PIVCLS, SE E, and operates with HF (High Frequency) standards, SIO, SEOS, and FIPS compliance. It is engineered for robust performance in access control systems, providing reliable authentication for authorized personnel. This manual provides essential information for the proper installation, operation, and maintenance of your RP10-H reader.
Bildbeschreibung: The image above displays the HID Global logo, which features the word "HID" in bold white capital letters against a solid blue rectangular background with rounded corners. A small registered trademark symbol (®) is visible in the upper right corner of the blue rectangle.
2. Einrichtung und Installation
Proper installation is crucial for the optimal performance of the RP10-H reader. It is recommended that installation be performed by qualified personnel.
2.1. Packungsinhalt
- HID Global RP10-H Reader (Model: 900PHRNEK00466)
- Montagezubehör (Schrauben, Dübel)
- Installationsanleitung (dieses Dokument)
2.2. Montageanleitung
- Choose a suitable mounting location, ensuring it is flat and free from obstructions.
- Verwenden Sie die mitgelieferte Montagevorlage (falls zutreffend), um die Bohrpunkte zu markieren.
- Bohren Sie Führungslöcher für die Befestigungsschrauben.
- Secure the reader to the mounting surface using the provided hardware. Ensure the reader is firmly attached.
2.3. Verkabelung und Stromanschluss
The RP10-H reader requires a stable power supply and proper connection to the access control panel. Refer to the wiring diagram provided with your specific access control system for detailed connections.
- Connect the reader's power input to a regulated DC power supply (typically 5-16 VDC).
- Connect the data lines (e.g., Wiegand, OSDP) to the corresponding inputs on your access control panel.
- Stellen Sie sicher, dass alle Verbindungen sicher und isoliert sind, um Kurzschlüsse zu vermeiden.
- Um elektrische Störungen zu vermeiden, ist eine ordnungsgemäße Erdung sicherzustellen.
3. Bedienung des Readers
Once installed and powered, the RP10-H reader is ready for operation.
3.1. Credential Presentation
To gain access, present your compatible access credential (e.g., PIV, SEOS card, mobile credential) within close proximity to the reader's face. The optimal reading distance may vary depending on the credential type and environmental factors.
3.2. LED and Audible Indicators
The RP10-H reader provides visual and audible feedback to indicate its status and the outcome of a credential presentation.
| Indikator | Beschreibung |
|---|---|
| Grüne LED | Indicates successful credential read and access granted. |
| Rote LED | Indicates credential read error or access denied. |
| Amber/Yellow LED | Indicates reader busy or awaiting input. |
| Einzelner Signalton | Successful credential read. |
| Multiple Beeps | Error during credential read or access denied. |
4. Wartung
The HID Global RP10-H reader is designed for minimal maintenance.
- Reinigung: Periodically wipe the reader's surface with a soft, damp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel, die die Oberfläche beschädigen könnten.
- Firmware-Updates: Firmware updates may be available from HID Global to enhance performance or add new features. Consult your system administrator or HID Global support for information on applying updates.
- Inspektion: Regularly inspect the reader and its wiring for any signs of damage or wear.
5. Fehlerbehebung
If you encounter issues with your RP10-H reader, refer to the following common troubleshooting steps.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Reader is unresponsive (no LEDs, no sound). | Kein Strom oder falsche Verkabelung. |
|
| Credential not reading or access denied (Red LED/multiple beeps). |
|
|
| Gelegentliches Lesen. |
|
|
For issues not resolved by these steps, please contact HID Global technical support or your system integrator.
6. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | 900PHRNEK00466 |
| Marke | HID Global |
| Angebotene Technologien | PIVCLS, SE E, HF STD/SIO/SEOS/FIPS |
| Farbe | Schwarz (BLK) |
| Schnittstelle | Wiegand (WG) |
| Verpackungsabmessungen | 8 x 8 x 8 Zoll |
| Artikelgewicht | 1 Pfund |
| ASIN | B07N5872JC |
| Datum der ersten Verfügbarkeit | 4. September 2019 |
7. Garantie und Support
For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official HID Global webWebsite.
For technical support, product inquiries, or further assistance, please contact HID Global customer service or your authorized distributor.
- HID Global Official WebWebsite: www.hidglobal.com
- Technische Unterstützung: Refer to the support section on the HID Global webWebsite finden Sie Kontaktinformationen für Ihre Region.
