Philips Sonicare ProtectiveClean 5100 Elektrische Zahnbürste – Benutzerhandbuch

1. Produktüberschreitungview

The Philips Sonicare ProtectiveClean 5100 electric rechargeable toothbrush is engineered to significantly improve gum health, offering up to 100% better results than a manual toothbrush. It incorporates a pressure sensor to safeguard your teeth and gums from excessive brushing force. The innovative BrushSync technology monitors brush head usage and brushing intensity, providing timely reminders for replacement. Users can personalize their brushing experience with three distinct modes: Clean, White, and Gum Care. An Easy-Start feature gradually increases brushing power, easing the transition to sonic brushing, while the Smartimer encourages a full 2-minute brushing cycle as recommended by dental professionals. The battery charge indicator light signals when recharging is necessary, with a typical battery life of two weeks.

Zu den Hauptmerkmalen gehören:

• Up to 62,000 brush movements per minute for effective cleaning.
• Customizable brushing experience with Clean, White, and Gum Care modes.

2. Packungsinhalt

The Philips Sonicare ProtectiveClean 5100 kit typically includes the following items:

• 1 Philips Sonicare ProtectiveClean 5100 Handle
• 1 Optimal Gum Care Brush Head
• 1 Ladegerät
• 1 Reisekoffer

3. Einrichtung

3.1 Aufladen der Zahnbürste

Before initial use, fully charge your Philips Sonicare ProtectiveClean 5100 for a minimum of 24 hours. Place the toothbrush handle securely onto the charger base. The battery indicator light will flash to signify that charging is in progress. Once fully charged, the light will glow solid green. A complete charge typically provides approximately two weeks of regular use, based on brushing twice daily for two minutes per session.

3.2 Anbringen des Bürstenkopfes

Align the brush head with the front of the toothbrush handle. Gently push the brush head down onto the metal shaft until it is firmly in place. A small gap between the brush head and the handle is normal and essential for the proper vibration of the brush head.

4. Bedienungsanleitung

4.1 Ein-/Ausschalten

Press the power button located on the handle to turn the toothbrush on or off.

4.2 Bürstenmodi

Your ProtectiveClean 5100 offers three distinct brushing modes. After turning the toothbrush on, press the mode button (or repeatedly press the power button, depending on your model) to cycle through the available modes:

• Sauber: Standardmodus für optimale tägliche Reinigung.
• Weiß: Entwickelt zur Entfernung oberflächlicher Verfärbungen und zur Aufhellung der Zähne.
• Zahnfleischpflege: Bietet eine sanfte Massage für das Zahnfleisch und ist ideal zur Verbesserung der Zahnfleischgesundheit.

4.3 Drucksensor

The toothbrush is equipped with a built-in pressure sensor. If you apply excessive pressure while brushing, the handle will alter its vibration pattern, and a dedicated pressure sensor light (if present on your model) will illuminate. Reduce pressure immediately to prevent potential damage to your gums and teeth.

4.4 Smartimer and QuadPacer

Der Smartimer automatically turns off the toothbrush after 2 minutes of brushing, aligning with the duration recommended by dental professionals. The QuadPacer feature provides a short signal every 30 seconds, prompting you to move to the next quadrant of your mouth. This ensures a thorough and balanced cleaning of all areas.

5. Wartung

5.1 Reinigung der Zahnbürste

After each use, rinse the brush head and its bristles thoroughly under running water. Wipe the toothbrush handle with a damp Tuch. Tauchen Sie das Ladegerät nicht in Wasser.

5.2 Bürstenkopfwechsel

Your Philips Sonicare ProtectiveClean 5100 utilizes BrushSync technology, which tracks the duration of brush head use and the pressure applied during brushing. A brush head replacement reminder light will illuminate, and the handle will emit a beep to indicate when it is time to replace your brush head. This typically occurs every 3 months, or sooner if the bristles show visible signs of wear.

5.3 Batteriepflege

To optimize battery longevity, it is recommended to fully discharge the battery every 6 months by using the toothbrush until it completely stops. Afterward, recharge it for a full 24-hour cycle.

6. Fehlerbehebung

6.1 Zahnbürste schaltet sich nicht ein

• Stellen Sie sicher, dass die Zahnbürste vollständig aufgeladen ist.
• If the issue persists, try cleaning the charging contacts on both the handle and the charger base.

6.2 Reduced Vibration or Power

• Stellen Sie sicher, dass der Bürstenkopf sicher am Griff befestigt ist.
• Stellen Sie sicher, dass der Akku ausreichend geladen ist.
• If the problem continues, the brush head may be worn out and require replacement.

6.3 Pressure Sensor Constantly Activating

• Adjust your brushing technique to apply less pressure. The sensor is designed to protect your gums from aggressive brushing.

7. Spezifikationen

8. Garantie und Support

This Philips Sonicare product is covered by a manufacturer's warranty. For comprehensive warranty details, product support, or service inquiries, please consult the documentation provided within your product packaging or visit the official Philips Sonicare website. It is advisable to retain your proof of purchase for any potential warranty claims.