NutriMill Ice Cream Maker Attachment User Manual

Produkt überview

The NutriMill Ice Cream Maker Attachment (Model MUZ6IC1) is designed to work seamlessly with Bosch Universal Plus and NutriMill Artiste mixers. This attachment allows you to create homemade ice cream, sorbet, and frozen yogurt quickly and efficiently, utilizing the power of your existing mixer.

Image: The complete Ice Cream Maker Attachment, showing the stainless steel bowl and white lid with the central opening.

Hauptmerkmale:

• Compatibility: Specifically designed for Bosch Universal Plus and NutriMill Artiste mixers. (Note: Not compatible with the original Bosch Universal mixer.)
• Capacity: Features a 1.5-quart ice cream bowl, ideal for making a batch of ice cream in approximately 20 minutes.
• Integrated Design: Eliminates the need for a separate, standalone ice cream maker, saving counter space.
• Durable Construction: Simple yet robust design ensures longevity.
• Efficient Cooling: Utilizes ice and salt around the bowl, allowing for multiple churnings without refreezing the bowl itself.

Sicherheitsvorkehrungen

• Always ensure the mixer is unplugged before attaching or detaching components.
• Do not immerse the mixer base in water.
• Halten Sie Hände und Utensilien während des Betriebs von beweglichen Teilen fern.
• Ensure the lid is securely in place before starting the mixer.
• Use only recommended ingredients and recipes for ice cream making.
• Dieses Gerät ist nur für den Gebrauch zu Hause bestimmt.

Einrichtung und Montage

1. Komponenten auspacken: Carefully remove all parts from the packaging. You should have the stainless steel bowl, the lid, and the paddle.

Image: The individual components of the ice cream maker attachment: the stainless steel bowl, the white lid, and the white paddle.
2. Assemble Paddle to Lid: Insert the paddle into the central opening on the underside of the lid. Ensure it clicks securely into place.


Image: The white lid viewed from underneath, showing the paddle securely attached to its central mechanism.

3. Place Bowl on Mixer: Position the stainless steel bowl onto the mixer base. Ensure it is seated correctly and stable.
4. Add Ice and Salt: Fill the space between the stainless steel bowl and the mixer's outer bowl with ice and rock salt. A ratio of 4 parts ice to 1 part rock salt is generally recommended. This creates the freezing environment.


Image: The stainless steel ice cream bowl placed within the mixer's outer bowl, surrounded by ice and salt, with the ice cream mixture inside.

5. Mischung einfüllen: Pour your prepared ice cream mixture into the stainless steel bowl. Do not overfill; leave at least 1 inch of space from the top to allow for expansion.
6. Deckel anbringen: Place the lid with the attached paddle onto the stainless steel bowl, ensuring the paddle engages with the mixture and the lid is securely fastened to the mixer base.

Image: The NutriMill Ice Cream Maker Attachment fully assembled and placed on a NutriMill Artiste mixer, ready for operation.

Bedienungsanleitung

1. Mischung zubereiten: Ensure your ice cream mixture is chilled according to your recipe before pouring it into the bowl.
2. Connect Mixer: Plug in your Bosch Universal Plus or NutriMill Artiste mixer.
3. Starten Sie den Prozess: Turn the mixer to a low speed setting (typically speed 1 or 2) to begin churning. The paddle will continuously mix the ingredients as the ice and salt mixture chills the bowl.
4. Churning Time: Churn for approximately 15-25 minutes, or until the ice cream reaches your desired consistency. The churning time may vary based on the recipe and initial temperature of the mixture.
5. Konsistenz prüfen: You can periodically check the consistency by briefly stopping the mixer and lifting the lid.
6. Servieren oder Aufbewahren: Once churning is complete, turn off and unplug the mixer. Remove the lid and paddle. Serve the ice cream immediately for a soft-serve consistency, or transfer it to an airtight container and freeze for a firmer texture.


Image: A hand scooping freshly made ice cream from the attachment bowl into a serving cup, demonstrating the final product.

Wartung und Reinigung

Proper cleaning and maintenance will extend the life of your ice cream maker attachment.

• Handwäsche nur: The stainless steel bowl, lid, and paddle should be hand washed with warm, soapy water.
• Gründlich ausspülen: Spülen Sie alle Teile gründlich ab, um eventuelle Seifenreste zu entfernen.
• Vollständig trocknen: Dry all parts completely before storing to prevent water spots or corrosion.
• Lagerung: Bewahren Sie den Aufsatz an einem sauberen, trockenen Ort auf.
• Mixerbasis: Wipe down the mixer base with a damp Tuch. Tauchen Sie den Mixerfuß nicht in Wasser.

Fehlerbehebung

Technische Daten

Garantie und Support

For warranty information or technical support regarding your NutriMill Ice Cream Maker Attachment, please contact NutriMill customer service directly.

Refer to your mixer's user manual for specific warranty details related to the mixer unit itself.

NutriMill Contact Information:

• WebWebsite: www.nutrimill.com (Hinweis: Dies ist ein Platzhalter. URL as specific contact info is not provided in the input JSON. Users should refer to official product packaging or brand website for accurate contact details.)
• Customer Service: Please check the NutriMill webTelefonnummern und E-Mail-Adressen finden Sie auf der Website oder auf der Produktverpackung.