Empire Replacement Battery User Manual

Einführung

This manual provides essential information for the safe and effective use of your Empire replacement battery, model BLP-1451-2.1. This battery is designed as a direct replacement for the HTC 35H00216-00M battery, compatible with the HTC ONE M8 MINI smartphone. Please read this manual thoroughly before installation and use.

Sicherheitsvorkehrungen

• Do NOT attempt to disassemble, open, or service the battery pack.
• Ersetzen Sie es ausschließlich durch den für dieses Produkt vorgesehenen Akku.
• Do NOT crush, puncture, short external contacts, or dispose of in fire or water.
• Do NOT store above 60°C (140°F).
• Der neue Akku muss vor der ersten Benutzung vollständig aufgeladen werden. Refer to the operating guide for charging instructions.
• Warranty void if label is removed.

WARNUNG: Um das Risiko von Bränden oder Verbrennungen zu verringern, lesen Sie vor der Verwendung des Akkus die Anweisungen in der Bedienungsanleitung.

Bild: Rückseite view of the Empire replacement battery, displaying important caution and warning labels regarding handling and disposal.

Setup und Installation

Installing a replacement battery in a smartphone typically requires technical expertise and specialized tools. It is highly recommended to seek professional assistance for battery replacement to avoid damage to your device or the new battery.

If you choose to proceed with self-installation, please follow these general guidelines:

1. Gerät ausschalten: Ensure your HTC ONE M8 MINI is completely powered off before beginning the installation process.
2. Sammeln Sie Werkzeuge: You will likely need a precision screwdriver set, plastic prying tools, and potentially a heat gun or hairdryer to loosen adhesive.
3. Demontage: Carefully disassemble your phone according to a reliable device-specific repair guide. Pay close attention to ribbon cables and connectors.
4. Alte Batterie entfernen: Gently disconnect the old battery's connector and carefully pry it out. Be extremely cautious not to puncture or bend the old battery.
5. Neue Batterie einbauen: Connect the new Empire battery (BLP-1451-2.1) to the motherboard connector. Ensure it is seated correctly in the battery compartment.
6. Zusammenbau: Carefully reassemble your phone, ensuring all components are properly connected and secured.
7. Grundgebühr: After reassembly, fully charge the new battery before its first use.

Bild: Vorderseite view of the Empire replacement battery, showing capacity (2100mAh), type (Lithium-Polymer), voltage (3.8VDC), and part number (BOP6M100).

Bild: Abgewinkelt view of the Empire replacement battery, highlighting the flexible connector ribbon and the battery's specifications.

Bedienungsanleitung

Once installed, the Empire replacement battery operates identically to the original battery in your HTC ONE M8 MINI. No special operating procedures are required.

• Laden: Use only the original or certified compatible charger for your HTC ONE M8 MINI. Avoid using unapproved chargers, as they may damage the battery or device.
• Erste Verwendung: Für eine optimale Leistung laden Sie den Akku vor dem ersten Gebrauch vollständig auf.
• Akkulaufzeit: Battery life varies based on usage patterns, network conditions, and device settings.
• Temperatur: Avoid exposing the device with the installed battery to extreme temperatures (below 0°C / 32°F or above 35°C / 95°F) as this can degrade battery performance and lifespan.

Wartung

Proper maintenance can extend the lifespan of your battery:

• Regelmäßiges Laden: Avoid frequently discharging the battery completely. It is generally better to keep the battery charged between 20% and 80%.
• Lagerung: If storing the device for an extended period, ensure the battery is charged to approximately 50% before storage. Store in a cool, dry place.
• Reinigung: Do not attempt to clean the battery itself. If the phone's charging port or external contacts become dirty, use a soft, dry brush or compressed air to clean them.
• Entsorgung: Do not dispose of batteries in household waste. Lithium-Polymer batteries should be recycled responsibly at designated collection points. Consult local regulations for proper disposal.

Fehlerbehebung

If you experience issues with your new battery, consider the following:

• Akku lädt nicht:
  • Ensure the charger and charging cable are functioning correctly. Try a different charger/cable.
  • Check the phone's charging port for debris.
  • Verify the battery connector is securely seated inside the phone (requires re-opening the device).
• Schnelle Batterieentladung:
  • Check background apps and services running on your phone. Close unnecessary applications.
  • Reduzieren Sie die Bildschirmhelligkeit und deaktivieren Sie Funktionen wie WLAN, Bluetooth oder GPS, wenn Sie diese nicht benötigen.
  • Perform a factory reset of your phone (back up data first) to rule out software issues.
• Telefon lässt sich nicht einschalten:
  • Stellen Sie sicher, dass der Akku geladen ist. Schließen Sie ihn für mindestens 30 Minuten an ein Ladegerät an.
  • Verify the battery is correctly installed and connected.

If problems persist after attempting these steps, professional repair service may be required.

Technische Daten

Garantieinformationen

The warranty for this product is provided by the seller. Please refer to your purchase documentation or contact the seller directly for specific warranty terms and conditions. Note that the warranty may be void if the battery's label is removed, as indicated on the product itself.

Kundenservice

For technical assistance or inquiries regarding your Empire replacement battery, please contact the seller or manufacturer through the platform where the purchase was made. Provide your order details and the product model number (BLP-1451-2.1) for faster service.

Manufacturer: Empire

Verfügbar ab: 2. November 2015