Vertrauen 12616

Trust Soundwave 1000P PC Speaker User Manual

Modell: 12616

Einführung

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Trust Soundwave 1000P PC Speaker system. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Trust Soundwave 1000P PC Speaker system with subwoofer and two satellite speakers

Image: The Trust Soundwave 1000P PC Speaker system, featuring a central subwoofer unit and two compact satellite speakers, designed for computer audio. The subwoofer is typically placed on the floor, while the satellite speakers are positioned on a desk.

Installationsanweisungen

Follow these steps to correctly set up your Trust Soundwave 1000P PC Speaker system.

  1. Auspacken: Carefully remove all components from the packaging. Ensure you have the subwoofer, two satellite speakers, and all necessary cables.
  2. Lautsprecherplatzierung:
    • Place the subwoofer on the floor, preferably near your computer desk, to optimize bass response. The vertical bass reflex design benefits from clear space around it.
    • Position the two satellite speakers on your desk, equidistant from your listening position, for optimal stereo sound.
  3. Anschluss von Satellitenlautsprechern: Connect the cables from the satellite speakers to the corresponding output ports on the subwoofer unit. Ensure a secure connection.
  4. Connecting to Audio Source (PC): Connect the 3.5mm audio jack cable from the subwoofer to the audio output port (usually green) on your computer's sound card.
  5. Stromanschluss: Stecken Sie das Netzkabel des Subwoofers in eine normale Steckdose.
  6. Erstes Einschalten: Turn on the speaker system using the power control, typically located on the subwoofer or a wired remote.

Bedienung der Lautsprecher

Once set up, you can begin using your Soundwave 1000P speakers.

  • Ein-/Ausschalten: Use the main power switch or button to turn the system on or off. An indicator light may confirm the power status.
  • Lautstärkeregelung: Adjust the overall volume using the dedicated volume knob or controls. Start with a low volume and gradually increase it.
  • Basseinstellung: The subwoofer features an adjustable bass control. Rotate the bass knob to achieve your desired level of deep bass.
  • 3D Sound Switch: Activate or deactivate the 3D sound feature using the designated switch. Experiment with this setting to find your preferred audio experience for different content.
  • Audioeingang: The system primarily uses an AUX connection. Ensure your audio source is playing sound through its 3.5mm audio output.

Wartung und Pflege

Durch sachgemäße Wartung wird die Langlebigkeit und optimale Leistung Ihres Lautsprechersystems gewährleistet.

  • Reinigung:
    • Trennen Sie vor der Reinigung den Strom.
    • Use a soft, dry cloth to wipe down the speaker surfaces.
    • Verwenden Sie keine flüssigen Reinigungsmittel, Aerosole oder Scheuermittel, da diese die Oberfläche oder interne Bauteile beschädigen können.
  • Platzierung: Avoid placing speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the subwoofer.
  • Kabelmanagement: Keep cables tidy and avoid sharp bends or kinks to prevent damage.
  • Lagerung: If storing the speakers for an extended period, disconnect them from power, clean them, and store them in a dry, cool place, preferably in their original packaging.

Anleitung zur Fehlerbehebung

If you encounter issues with your Trust Soundwave 1000P speakers, refer to the following common problems and solutions.

ProblemMögliche UrsacheLösung
Kein Ton aus den Lautsprechern.
  • Stromanschluss nicht vorhanden oder eingeschaltet.
  • Audiokabel nicht angeschlossen oder defekt.
  • Lautstärke zu gering.
  • Incorrect audio output selected on PC.
  • Ensure power cable is securely plugged in and speakers are turned on.
  • Check 3.5mm audio cable connection to both speakers and PC. Try a different cable if available.
  • Increase speaker volume and PC volume.
  • Verify PC audio settings to ensure the correct output device is selected.
Verzerrter oder undeutlicher Ton.
  • Lautstärke zu hoch.
  • Schlechte Audioquellenqualität.
  • Lose Kabelverbindungen.
  • Reduce volume on both speakers and PC.
  • Testen Sie es mit einer anderen Audioquelle oder file.
  • Prüfen Sie alle Kabelverbindungen auf festen Sitz.
Der Subwoofer gibt keinen Bass wieder.
  • Bass control knob set too low.
  • Subwoofer not powered.
  • Increase the bass control knob on the subwoofer.
  • Ensure the subwoofer unit is receiving power and is turned on.

Produktspezifikationen

Key technical details for the Trust Soundwave 1000P PC Speaker system.

  • Modellnummer: 12616
  • Marke: Vertrauen
  • Lautsprechertyp: Subwoofer (2.1 system)
  • Maximale Spitzenausgangsleistung: 1000 Watt
  • RMS Wattage: 7 Watt (5 + 2 x 1 Watt RMS)
  • Konnektivitätstechnologie: AUX (3.5-mm-Klinke)
  • Audioausgabemodus: Stereo
  • Energiequelle: Kabelgebundene Elektrik
  • Artikelgewicht: 10 g
  • Montageart: Tabletop Mount (for satellites), Floor (for subwoofer)
  • Kontrollmethode: Berühren

Garantieinformationen

Dieses Produkt wird mit einem Eingeschränkte Garantie. For specific terms and conditions, including warranty duration and claim procedures, please refer to the warranty card included with your purchase or visit the official Trust webBewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.

Kundenservice

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Trust support weboder wenden Sie sich an den Kundendienst. Die Kontaktdaten finden Sie in der Regel auf der Website des Herstellers. webStandort oder Produktverpackung.

Official Trust WebWebsite: www.trust.com

Zugehörige Dokumente - 12616

Vorview Trust TYTAN 2.1 Lautsprecherset – Kurzanleitung zur Installation
Kurzanleitung zur Installation des Trust TYTAN 2.1 Lautsprechersets mit detaillierten Informationen zu Einrichtung, Audioanschlüssen, Stromversorgung, drahtloser Kopplung und ECO-Modus für Windows- und Bluetooth-Geräte.
Vorview Trust Vigor 2.0 Lautsprecherset – Kurzanleitung zur Installation
Kurzanleitung für das Trust Vigor 2.0 Lautsprecherset mit Installations- und Anschlusshinweisen für PC- und Laptop-Nutzer. Enthält Details zum Anschluss über USB und Audiobuchsen sowie zur Geräteauswahl in Windows.
Vorview Trust Avora 2.1 Speaker Set Quick Installation Guide
Concise and SEO-optimized HTML guide for setting up the Trust Avora 2.1 Speaker Set, covering volume/bass controls, physical setup, audio/power connections, and Windows installation.
Vorview Trust Arys 2.0 Lautsprecherset: Kurzanleitung zur Installation
Ausführliche Kurzanleitung zur Installation des Trust Arys 2.0 Lautsprechersets (14 W, Modell 20179). Erfahren Sie, wie Sie Ihre Lautsprecher an Ihren PC oder andere Geräte anschließen, mit Strom versorgen und einrichten.
Vorview Trust 2.1 Speaker Set Quick Installation Guide
Quick installation guide for the Trust 2.1 Speaker Set, detailing setup, audio connections, power on, and volume control. Includes information on Windows installation and ECO mode.
Vorview Trust GXT 611 Wezz Gaming Speaker Set User Guide
User guide for the Trust GXT 611 Wezz Gaming Speaker Set, detailing setup and operation. Includes information on connections, power, and RGB lighting.