DDOT SC296 Smart Camera User Manual

DDOT SC296 Smart Camera

Technical Specifications

• Audio: Internal Speaker and Microphone
• Storage: supports up to 256GB Micro SD card (not induded)
• Power: General 5V Direct Current 2A, symbol “=” means direct current
• It is recommended that the camera only be used indoors.
• Operating temperature – 10~45 C, Operating humidity s 95%
• Radio Communication
  • 24G Wi-Fi: 2400-2483,5MHZ, ≤ 20 dBm
  • 5G WI-FI: 5,150-5,850GHz, ≤ 20 dBm
  • Bluetooth: 2400-2483,5MHz, 5 10 dBm
  • Built-in battery: 2600mAh

Thank you for purchasing Smart Camera. Get started using your new devices by downloading Smart Life, one convenient app that manages everything straight from your phone. Easily connect to your home Wi-Fi and control multiple devices with the touch of your fingertips

What’s in the Box

• Smart Camera X1
• USB Cable xl
• User Manual xl
• Adapter xl *

Different products have different accessories; please refer to the physical packing.

Introduction

Get Ready

Know your Wi-Fi name and password Make sure your mobile device is running iOS@ 11 or higher or Android TM 6.0x or higher

1. Download the Smart Life app from App Store or Google Play.
2. Register an account on your Smart Life app
   STEP I.: Enter your mobile phone number or email address.
   STEP 2. : Enter the verification code and create a password.

Plug in

How do I reset my device

• Press the Reset Button (as Pic 2) for several seconds until the camera starts to beep.
• Optional: Insert a Micro SD card as shown in Pic 2.

Add device

A.QuickIy way
Open the “Smart Life” APP, turn on the Bluetooth on your mobile phone, and grant the corresponding permission tothe “Smart Life” APP. Click the “Add”  button.

If the dialog box does not pop up,you can click the “+” icon or “Add Device” button on the home page, and the camera will be searched, then click the “Add”.

Enter Wi-Fi name and password, then click the “Next”.

Wait for the camera to automatically complete network configuration.

B.QR code way
Open “Smart Life” APP, click “+” n the top right corner of the page “HOME”, then select “Smart Camera (Wi-Fi)

Make sure the indicator is flashing or a prompt tone is heard, then press “Next.”

Enter Wi-Fi name and password, then press “Next.”

Scan the QR Code on your phone with camera. Heard a prompt tone, then press “I Heard a Prompt”.

wait for the network configuration to complete

• Please refer to the specific APP interface if there are any differences.
• You can find much more useful information in the Help Center on App.

FCC Statement

warning
Federal Communications Commission (FCC) Declaration of Conformity

CC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. his device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ote: This equipment has been tested and found to comply ith the limits for a Class B digital device, pursuant to part 5 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy and, if not installed and set in accordance with the instructions, may cause harmful interference to radio communications. However,  here is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with the FCC radiation exposure limit set forth for an uncontrolled rolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Declaration Of Conformity European Notice

CE: Hereby, Zhejiang Lingzhu Technology CO., Ltd. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU,2011/65/EU.

Disposal
This product must not be disposed of as normal household waste, in accordance with the EU directive for waste electrical and electronic equipment (WEEE- 2012/19/EU). Instead, it should be disposed of by returning it to the point of sale or to a municipal recycling collection point. The device could be used with a separation distance of 20cm to the human body.

Warning Statement:
‘This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.”

Radiation Exposure Statement:
His equipment complies with Canada’s RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Please read the instruction manual carefully efore using the product