DBPOWER Projector User Guide
QUICK-START GUIDE
- Place the projector on a flat desk or table in front of the projector screen.
- Connect the power supply.
- Remove the lens cover.
- Press the power button.
- Adjust picture clarity using focus and keystone.
A. Multimedia Connection
B.HOMI Connection
C.VGA Connection
- Select data source.
Read More About This Manual & Download PDF:
Documents / Resources
 | Projector |
References
- Messengerm.me
- DBPOWER - The Power of Innovation PayPal Venmowww.dbpower.co
- User Manualmanual.tools
Published: August 11, 2021
Is there a way to reset the t20 projector? I have tried to do it on the screen through settings with the factory reset but it doesn’t do anything. The problem is that the USB isn’t letting me see new uploaded files
How do I reset the DBPOWER T20 projector and fix USB file detection issues?
If the software-based factory reset in the settings menu is not responding, you can perform a hard power reset to clear the system cache. To do this, unplug the power cable from the wall outlet while the projector is on, wait for at least 30 seconds, and then plug it back in.
Regarding your USB issue, if the projector is not seeing new files, please check the following:
If the reset still fails to function and the USB port remains unresponsive, you should contact DBPOWER support directly at support@dbpower.co or call 1-855-666-9888 for further technical assistance.
Read the full Q&A page