DBA RS240 Resonance Speaker
Contents of the Packaging
- RS240 Resonance Speaker
- Adaptor
- Power Cable
- DBA Audio Catalogue
Bottom plate controls 
Pair/Play
- Press the Power button to turn on
- A quick press and release BT Connect once for 1 second Wait for the ‘Pairing’ voice prompt
- Pairing Code: DBA Audio with iPhone
- Play your music at BT Device
- Adjust the Volume on the BT device
Stereo Pairing
- Pairing 2nd slave speaker – Press Power On
- Press and release BT Connect on the 2nd slave Speaker for about 5 seconds
- Press BT Connect on 1st Master speaker for about 5 seconds then release
- Stereo Pairing connects automatically
Reset
- Turn Speaker On
- Press and hold the BT Connect button for 12 seconds to clear old memory and reset
- If still not working properly, turn off and reset 2nd speaker
Documents / Resources
 |
DBA RS240 Resonance Speaker [pdf] User Guide RS240 Resonance Speaker, RS240, Resonance Speaker, Speaker |
