dB Technologies IS26T-WP 2 Way Passive Speaker User Manual
MAIN FEATURES
- Versatile ·Quick installation
- Suitable for indoor and outdoor installations
PACKAGE CONTENTS
The box contains: N°1 passive speaker This quick start and warranty documentation
DESCRIPTION
IS26T-WP is a full-range 2-way professional passive speaker with two 6.5” woofers and a 1” compression driver for the high frequencies. Compact, with a high linear response, IS26T-WP offers maximum sound pressure and condenses the best of the dBTechnologies acoustic experience and IP55 protection for indoor and outdoor sound reinforcement. This speaker uses the concept of maximum versatility, allowing dozens of different configurations achievable with the available accessories.
ACCESSORIES
DIMENSIONS
TECHNICAL SPECIFICATIONS
CONNECTIONS
PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)
The speakers are protected against the ingress of solid objects and liquids with a rating of IP55 as defined by EN 60529. Please only use cables with the specified diameters: PG9 => between 4 and 8mm diameter Fasten properly the cable gland using the plastic tightening nut
⚠ WARNING!
Failure to comply with these installation prescriptions could adversely affect the declared protection ratings.
COVERAGE
The default acoustic coverage is 60°x90° (HxV) and its usage is both for vertical and horizontal configuration. The coverage of the horn is indicated on the sides to assist users in configuring the speaker according to their needs. Using HK-15100WG accessory kit (not included), the customer can change the horn installed on the speaker and easily transforms IS26T-WP from a point source to a line array system.
INSTALLATION
WARNINGS
⚠ WARNING: Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loudspeaker check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. The external wiring connected to speaker output terminals requires installation by qualified personnel only. Once the equipment is installed, prevent access to the connectors to unqualified personnel. Only use the accessories and configurations described in this manual, and proceed in accordance with the instructions given in the manuals for the accessories. dBTechnologies will not accept any responsibility for damages caused by inappropriate accessories or additional devices.
Installation and use of this equipment and its accessories must be performed only by “Expert personnel” according to safety standard. To prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product. For safe use, periodically check that all parts are in good working condition before use. Only authorised personnel may carry out design, calculations, installation, testing and maintenance of professional flown or stacked audio systems.
Check periodically the integrity and the functionality of the accessories and the technical equipment’s for a safe installation. user should never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation, installation, testing and maintenance of suspension and stack systems for audio equipment must be performed only by qualified and authorized personnel. AEB Industrial s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
The warnings in this manual must be observed together with the “User Manual – Section 2”.
Scan with your QR Reader App to download the complete User Manual.
A.E.B. Industriale Srl
Via Brodolini, 8
Località Crespellano
40053 VALSAMOGGIA
BOLOGNA (ITALIA)
Tel. +39 051 969870
Fax +39 051 969725
www.dbtechnologies.com
info@dbtechnologies-aeb.com
info@dbtechnologies-aeb.com
Documents / Resources
 |
dB Technologies IS26T-WP 2 Way Passive Speaker [pdf] User Manual 420120456Q REV1.0, IS26T-WP_QUICK-START_REV1.0, IS26T-WP 2 Way Passive Speaker, IS26T-WP, 2 Way Passive Speaker, Passive Speaker, Speaker |