DAYTECH E-01W Newest Security Alarm Wireless Pager
Product Overview
This document provides details about the E-01W device, including specifications, compliance information, and troubleshooting tips.
Device Description
The E-01W is a wearable device designed for emergency situations, featuring an SOS button. It is compact and made from durable materials, suitable for everyday use.
Specifications
| Model | E-01W |
|---|---|
| Standby Current | Less than 3uA |
| Alarm Current | Less than 15mA |
| Wireless Transmitting Distance | Less than 80m (open area/no interference) |
| Wireless Transmitting Frequency | 433MHz |
| Case Material | ABS plastics |
| Operating Temperature | -10 to 55 degrees Celsius |
Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Interference and Troubleshooting
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
FAQ
- What is the standby current of the E-01W?
The standby current is less than 3uA. - What is the alarm current of the device?
The alarm current is less than 15mA. - What is the wireless transmitting distance?
The device can transmit wirelessly up to 80 meters in open areas without interference. - What should I do if the device causes interference?
Try reorienting the antenna, increasing the distance from the receiver, using a different outlet, or consulting a technician.
Specifications
- Model:E-01W
- Standby Currents: less than 3uA
- Alarm Current: less than15mA
- Wireles Transmitting Distance: less than 80m (open area/ no-interfering)
- Wireless Transmitting Frequency: 433MHz
- Case Material: ABS plastics
- Operating Temperature: -10 ~55 degrees
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
DAYTECH E-01W Newest Security Alarm Wireless Pager System [pdf] Instructions E-01W, E-01W Newest Security Alarm Wireless Pager System, Newest Security Alarm Wireless Pager System, Security Alarm Wireless Pager System, Alarm Wireless Pager System, Wireless Pager System, System |
