PowerScan™ PBT9600 RFID
reader and BC9600 base charger
REGULATORY ADDENDUM
Industrial Cordless Handheld Area Imager Bar Code RFID Reader
REGULATORY INFORMATION
All models are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly approved by Datalogic could void the user’s authority to operate the equipment.
Statement of Agency Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any change or modification to the product not expressly approved by Datalogic could void the user’s authority to operate the device.
FCC Class B Compliance Statement
The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio or television technician for help.
Base Charger BC9600-BT/BC9620
FCC
CAUTION: Exposure to Radio Frequency Radiation
To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of at least 20 cm must be mantained between the antenna of this device and all persons.
IC
Canada Notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Reader PowerScan PBT9600 type SR RFUS
Canada Notice
This device complies with SAR for general population /uncontrolled exposure limits defined in 47 Cfr 2.1093 / RSS 102 Issue 6 and had been tested in accordance with the measurement methods and procedures specified in IEC/IEEE 62209-1528, 2020.
FCC
Radiofrequency Radiation Exposure Information:
This device complies with SAR for general population /uncontrolled exposure limits defined in 47 Cfr 2.1093 / RSS 102 Issue 6 and had been tested in accordance with the measurement methods and procedures specified in IEC/IEEE 62209-1528, 2020.
Frequency Band Used
- 2400-2483,5 MHz
- 902,75-927,25 MHz
Maximum Output Power
< 20 dBm
DEVICE LABELING
Sample labels are shown here to illustrate their location only. Please view the labels on your product for actual details, as they may vary from those depicted.
Scanner Regulatory Label
Base Regulatory Label
Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2024 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser’s own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com). If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the “Contact” page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right to change any specification at any time without rior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.
PowerScan is a trademark of Datalogic S.p.A. and/or its affiliates, registered in the U.S. All other trademarks and brands are property their respective owners.
Patents
See www.patents.datalogic.com for an updated patent list.
PBT9600 RFID
This product is covered by one or more of the following patents:
Utility patents: EP1873886B1, EP2382502B1, EP2517148B1, EP2577559B1, EP2649555B1, EP2795534B1, EP3607487B1, US7948214, US8517273, US8743263, US8888003, US8915443, US9087251, US9430689, US9482793, US9569653, US9798948, US10025966, US10496858, US10817685, US10915719, US10915476, US11334735, ZL200780030808.2, ZL200880132595.9, ZL200980163411.X, ZL201080071124.9, ZL201180026461.0.
Model Numbers:
- PBT9600 Type SR RFUS
- BC9600-BT
- BC9620
CAUTION: Do not insert nor apply any objects such as coins, paper clips, stickers or similar between the sides of the boot of the reader and the corresponding inner part of the base charger. Do not apply any stickers on the sides of the boot of the reader. The red arrows in the image below indicate the affected areas.
Aiming System
The aiming system of this device meets the Class 2 requirements for laser safety. The laser information is located on the scanner label.
The laser scanner conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN60825-1 at the date of manufacture.
The laser light is visible to the human eye and is emitted from the output window.
The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your terminal.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufacture.
For installation, use and maintenance, it is not necessary to open the device.
The product utilizes a low-power laser diode. Although staring directly at the laser beam momentarily causes no known biological damage, avoid staring at the beam as one would with any very strong light source, such as the sun. Avoid allowing the laser beam to hit the eye of an observer, even through reflective surfaces such as mirrors, etc.
WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in exposure to hazardous visible laser light.
CAUTION: The PowerScan™ Handheld Reader is not user- serviceable. Opening the case of the unit can cause inter- nal damage and will void the warranty.
©2024 Datalogic S.p.A. and/or its affiliates
All rights reserved
Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U.
This document is an addendum to the Quick Reference Guide (QRG) for this product. See the QRG for additional product information.
Documents / Resources
 |
DATALOGIC PBT9600 PowerScan RFID Reader [pdf] Instruction Manual PBT9600, PBT9600 PowerScan RFID Reader, PowerScan RFID Reader, RFID Reader, Reader |