PRODUCT INSTRUCTIONS
ZERO SETTING
DEVICE
…ZERO Button: Short press for power on, long press 3 seconds for zero setting
in/mm Button: Short press for inch/metric conversion
FEATURES
LED display
Inductive measurement system
Response speed:3.2m/s
Auto power-off,when no use for 5 minutes Power on when the measuring face moving
SPECIFICATIONS
Resolution: 0.001mm/0.00005″
Accuracy: ±0.002mm/0.00005″
Repeatability: 0.003mm
Protection grade: IP65
Light indicating at “0”
Range: 0-3mm
3V lithium battery,life>1 year
INSTRUCTIONS
Step 1: Zero Setting
- Flip over the device,make the top surface of the device touch with the surface of worktable.
- Long press zero buttom to reset the position to 0.
Step 2:Operation
Fix the device on the worktable,conduct the cutting tools and chucks towards the measuring face until 0 point, in the meantime, the LED lights up, that means the “0” position has been set.
WARNING THE SAFETY INFORMATION GIVEN INSIDE MUST BE READ AND UNDERSTOOD BY ANY PERSON USING, INSTALLING, REPAIRING OR MAINTAINING THESE PRODUCTS
Documents / Resources
 |
Dasqua 1801-1010 Zero Setting Devices [pdf] Instruction Manual 1801-1010 Zero Setting Devices, 1801-1010, Zero Setting Devices, Setting Devices, Devices |