Danfoss-logo

Danfoss Type AK-CM 102 Communication Module

Danfoss-Type-AK-CM-102-Communication-Module-product

Specifications:

  • Product Name: Communication Module Type AK-CM 102
  • Model Number: 080Z0064
  • Power Requirements: Max. 32 VA
  • Cable: ANSI/TIA 568 B/C CAT5 UTP cable with RJ45 connectors

Product Usage Instructions

Installation:

  1. Ensure the power requirements do not exceed Max. 32 VA.
  2. Use ANSI/TIA 568 B/C CAT5 UTP cable with RJ45 connectors for installation.
  3. Follow the mounting instructions provided in the manual for AK-CM 102.

Module Addition/Removal:
Exercise caution when adding or removing modules to prevent damage to the communication module.

Installation Guide

Danfoss-Type-AK-CM-102-Communication-Module-fig- (9)

Communication module Type AK-CM 102

Danfoss-Type-AK-CM-102-Communication-Module-fig- (1)

  • 24 V AC/DC 2 VA
  • 0 °C < tamb < 55 °C
  • 32 °F < tamb < 130 °F
  • 0 – 95% RH, non condensing IP10 / VBG4
  • UL: E357029

Danfoss-Type-AK-CM-102-Communication-Module-fig- (2)

Princip

Danfoss-Type-AK-CM-102-Communication-Module-fig- (3)

Danfoss-Type-AK-CM-102-Communication-Module-fig- (4)

Mounting

Danfoss-Type-AK-CM-102-Communication-Module-fig- (5)

Warning

  • Ensure power is disconnected before adding or removing modules.
  • Controller configuration must be carried out when adding or removing modules.

Power Requirements

  • Power supply = 24 V AC or 18 – 36 V DC
  • Insure that it provides sufficient power for all the modules in the lineup. Class II is required.
  • The terminals 2,3 must not be earthed.

Danfoss-Type-AK-CM-102-Communication-Module-fig- (6)

Data communication

Danfoss-Type-AK-CM-102-Communication-Module-fig- (7)

Address = 001

TERM = on

Danfoss-Type-AK-CM-102-Communication-Module-fig- (7)

  • Address = 001
  • TERM = off
  • Address = 002
  • TERM = on

Cable:
ANSI/TIA 568 B/C CAT5 UTP cable w/ RJ45 connectors

The Product contains electrical components

  • And may not be disposed together with domestic waste. Equipment must be separate collected with Electrical and Elec-tronic waste. According to Local and currently valid legislation.

2 | AN03478642264901-000201

  • © Danfoss | Climate Solutions | 2022.07

FAQs

Q: How should I dispose of the product?
A: The product contains electrical components and should not be disposed of with domestic waste. It must be collected separately with Electrical and Electronic waste according to local legislation.

Q: What cable should I use for installation?
A: Use ANSI/TIA 568 B/C CAT5 UTP cable with RJ45 connectors for installation.

Documents / Resources

Danfoss Type AK-CM 102 Communication Module [pdf] Installation Guide
Type AK-CM 102, Type AK-CM 102 Communication Module, Communication Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *