Danfoss TR6 Universal Thermostatic Expansion Valve
Specifications
- Thermostatic expansion valve Type: TR6
- Refrigerants: R22/R407C, R410A, R32, and R454B
- Max. working pressure: 49 bar / 711 psig
- Flow direction: A -> B (Normal), B -> A (Reverse)
- Fixed setting: Qnom. A -> B = 100% Qnom. B -> A = 80%
- Adjustable setting: Min. 5% Ag
- Valve Size: 19 mm / 3/4 in.
- Torque: 10 Nm / 7 ft-lb
INSTALLATION
Refrigerants: R22/R407C, R410A, R32 and R454B
Max. working pressure: PS / MWP = 49 bar / 711 psig
Factory setting
- R22/R407C MAH
- SS = 4 K or according to customer specification
- R410A MAH & LAH
- SS = 3 K or according to customer specification
- R32 LAH
- SS: 3K or according to customer specification
- R454B LAH
- SS: 3K or according to customer specification
- SS: 3K or according to customer specification
CONTACT INFORMATION
- Climate Solutions
- danfoss.com
- +45 7488 2222
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in cataloques, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
FAQs
- Q: What is the maximum working pressure of the valve?
- A: The maximum working pressure is 49 bar / 711 psig.
- Q: How do I adjust the valve for different refrigerants?
- A: Follow the specified number of turns from SS to tight/loose spring according to the refrigerant type as mentioned in the manual.
Documents / Resources
![]() |
Danfoss TR6 Universal Thermostatic Expansion Valve [pdf] Installation Guide 067R9508, 067R9508, TR6 Universal Thermostatic Expansion Valve, TR6, Universal Thermostatic Expansion Valve, Thermostatic Expansion Valve, Expansion Valve |