Danfoss TE 2 Type Solder adaptor

Specifications

• Part Number: 068R9519
• Accessory Type: Solder Adaptor
• Compatible with: T2 / TE 2 Type
• Silver Content: Min. 5% Ag
• Recommended Torque: Min. 35 Nm (26 ft-lbs) – Max. 45 Nm (34 ft-lbs)
• Model Number: DKRCC.PI.AA0.D1.00 / 520H8198

Product Usage Instructions

Installation Process:

1. Ensure the solder adaptor is compatible with your T2 / TE 2 Type device.
2. Apply a small amount of soldering flux to the connection area.
3. Align the solder adaptor with the device’s connector and gently push it into place.
4. Use a torque wrench to tighten the adaptor to the recommended torque specifications (35-45 Nm).

Frequently Asked Questions

• Q: Is the solder adaptor compatible with all T2 / TE 2 Type devices?
  • A: Yes, the solder adaptor is designed to be compatible with T2 / TE 2 Type devices.
• Q: What is the recommended torque for installing the solder adaptor?
  • A: The recommended torque for installation is between 35 Nm (26 ft-lbs) and 45 Nm (34 ft-lbs).

068R9519

068R9519

Installation Guide Accessory for T2 / TE 2 Type Solder adaptor
Max. 700 °C (1300 °F)
Min. 5% Ag
Min. 35 Nm (26 ft-lbs) Max. 45 Nm (34 ft-lbs)
DKRCC.PI.AA0.D1.00 / 520H8198

© Danfoss A/S (AC-MCI/sw) 2013-10

Documents / Resources

Danfoss TE 2 Type Solder adaptor [pdf] Installation Guide T 2, TE 2, TE 2 Type Solder adaptor, TE 2, Type Solder adaptor, Solder adaptor, adaptor

References

• User Manual