Instructions

Danfoss Scroll compressors


1” rotolock	80 Nm
1 1/4” rotolock	90 Nm
1 3/4” rotolock	110 Nm
2 1/4” rotolock	145 Nm

This product is a Danfoss scroll compressor used for air conditioning and refrigeration system.

Installation and servicing of this compressor must be ensured by qualified personnel only.

Follow the instructions and sound refrigeration engineering practice relating to installation, commissioning, maintenance and service.

Instructions and technical information are available:

Scanning code opposite:

On Danfoss website cc.danfoss.com/instructions
Or can be requested in paper format at following address:

Danfoss Commercial Compressors, ZI Reyrieux 01600 Trévoux, France (The compressor model should be indicated in the request)

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.