Danfoss MM5 VACON 100 X Motor Mount Flange
Product Information: Vacon 100 X – Mains Switch
Specifications:
- Document code: DPD00978B
- Mounting instructions: MM5 example
Mounting Instructions
To mount the mains switch on the Vacon 100 X drive, follow these steps:
Step 1: Content of the Mains Switch Option Package
Refer to Figure 1 for the contents of the mains switch option package.
Drive and mains switch option.
Step 2: Disconnect the Cable Entry Plate
Locate the drive’s cable entry plate and disconnect it. This is where the mains switch will be mounted. Refer to Figure 3 for an example for MM5.
The mains switch can be mounted on either side of the drive. Disconnect the cable entry plate in which mains switch has to be mounted: example for MM5.
Cable entry plate from the bottom side of the drive from which the cables enter.
Step 3: Separate the Powerhead from the Terminal Box
Refer to Figure 5 to separate the powerhead from the terminal box.
Step 4: Connect the Supply Cable to the Mains Switch
Connect the supply cable to the mains switch. Refer to Figure 6 for a right-hand-side example.
Step 5: Connect Cables and Mount the Powerhead
Connect the cables to the mains switch and ensure they are properly connected. Then, mount the powerhead on the terminal box. Refer to Figure 7 and Figure 8 for visual guidance.
Frequently Asked Questions (FAQ)
- Q: Can the mains switch be mounted on either side of the drive?
A: Yes, the mains switch can be mounted on either side of the drive. - Q: Where should I disconnect the cable entry plate?
A: Disconnect the cable entry plate in which the mains switch has to be mounted. Refer to Figure 3 for an example. - Q: How do I connect the supply cable to the mains switch?
A: Connect the supply cable to the mains switch. Refer to Figure 6 for a right-hand-side example. - Q: How do I mount the powerhead on the terminal box?
A: After connecting the cables to the mains switch, mount the powerhead on the terminal box. Refer to Figure 8 for visual guidance.
24-hour support +358 (0)201 212 575
Email: vacon@vacon.com
Documents / Resources
 |
Danfoss MM5 VACON 100 X Motor Mount Flange [pdf] Instruction Manual MM5 VACON 100 X Motor Mount Flange, MM5, VACON 100 X Motor Mount Flange, X Motor Mount Flange, Mount Flange, Flange |
