Danfoss MBT5560 Built-In Transmitter Sensor
Product Information
Specifications:
- Model: Temperature Sensor MBT 3560 / MBT 5560
- Part Number: 084R9305
- Pin Connection:
- MBT 3560: 1: + supply, 2: + output signal, 3: – supply/common,4: not used
- MBT 5560: 1: + supply, 2: + output signal, 3: – supply/common,4: not used
- Model Number: IC.PI.P30.H2.02 / 520B6260
Product Usage Instructions
Installation Guide:
- Identify the correct pin connection based on the model (MBT 3560 or MBT 5560).
- Connect the sensor to the corresponding pins for power supply and output signal.
- Ensure proper grounding by connecting the common pin to the appropriate terminal.
- Refer to the specific equipment or system manual for integration details.
Temperature Sensor Operation:
The temperature sensor operates by measuring the ambient temperature and converting it into an electrical signal. The output signal can be used for monitoring and control purposes in various applications.
Maintenance:
Periodically check the sensor for any signs of damage or wear.
Clean the sensor surface gently with a soft cloth if necessary.
Avoid exposing the sensor to extreme conditions that may affect its performance.
Installation Guide
Temperature Sensor
MBT 3560 / MBT 5560
Plug M12 × 1
Electrical Connection
| Output signal | Pin connection | Power supply |
| 4 – 20 mA | 1: + supply | 10 – 32 V dc |
| 2: – supply | ||
| 3: not used | ||
| 4: not used | ||
| Absolute voltage | 1: + supply | 9 – 30 V dc |
| 2: + output signal | ||
| 3: – supply/common | ||
| 4: not used | ||
| Ratiometric | 1: + supply | 4.75 – 8 V dc |
| 2: + output signal | ||
| 3: – supply/common | ||
| 4: not used |
© Danfoss A/S (IA-MS/IM), 2014-04
IC.PI.P30.H2.02 / 520B6260
Frequently Asked Questions (FAQ):
Q: How do I calibrate the temperature sensor?
A: Calibration instructions can vary based on the specific model and application. Refer to the calibration section in the product manual for detailed steps on calibrating the sensor.
Q: Can the temperature sensor be used in outdoor environments?
A: The suitability of the sensor for outdoor use depends on its IP rating and environmental conditions. Check the product specifications or consult with the manufacturer for guidance on outdoor applications.
Documents / Resources
 |
Danfoss MBT5560 Built In Transmitter Sensor [pdf] Installation Guide MBT5560 Built In Transmitter Sensor, Built In Transmitter Sensor, Transmitter Sensor, Sensor |