Danfoss MBT 5550 Temperature Sensors Instructions
Danfoss MBT 5550 Temperature Sensors

Temperature Sensors

Din 43650A
Temperature Sensor

Electrical connection

4-20 mA 10-90% Supply
Pin1 + Supply + Supply
Pin 2 – Supply – Supply
Pin 3 Not used Output
Earth MBT 3560 & MBT 5560 is not connected to Earth. MBT 5550 is connected to Earth.

IEC 947-5-2, M12 × 1 
Temperature Sensor

Electrical connection 

4-20 mA 10-90% Supply
Pin 1 + Supply + Supply
Pin 2 Not used Not used
Pin 3 Not used Output
Pin 4 – Supply – Supply

AMP Econoseal, J-Series
Temperature Sensor

Electrical connection 

4-20 mA 10-90% Supply
Pin 1 + Supply + Supply
Pin 2 – Supply – Supply
Pin 3 Not used Output

Flying leads
Temperature Sensor

Electrical connection

Wire colour 4-20 mA 10-90% Supply
Red + Supply + Supply
Black – Supply – Supply
Blue Output

Screened cable
Temperature Sensor

Electrical connection 

Wire colour 4-20 mA 10-90% Supply
Red + Supply + Supply
White – Supply – Supply
Red/Black Not used Output
Screen Not connected to MBT housing

Bayonet plug for flying leads
Temperature Sensor

Electrical connection 

Wire colour 4-20 mA 10-90% Supply
Red + Supply + Supply
White – Supply – Supply
Red/Black Not used Output
Screen Not connected to MBT housing

Info for UK customers only: Danfoss Ltd., 22 Wycombe End, HP9 1NB,U

Danfoss A/S, Nordborgvej 81, 6430 Nordborg, DK

Logo

Documents / Resources

Danfoss MBT 5550 Temperature Sensors [pdf] Instructions
MBT 3560, MBT 5560, MBT 5550, Temperature Sensors, MBT 5550 Temperature Sensors, Sensors

References

Leave a comment

Your email address will not be published. Required fields are marked *