Danfoss EXD 316 Electronic Controller Installation Guide

Danfoss-logo

Danfoss EXD 316 Electronic Controller

Danfoss -EXD-316-Electronic-Controller-prodfubvt

Specifications

  • Product Name: Electronic controller, CANBUS version Type EXD 316
  • Identification: UK – 084B8042, DK – 084R8031
  • Application: Various applications including PLC, I/V, V
  • Features: Battery back up, electric stepper motor valve control, data communication capabilities
  • Power Supply: Max 24 V, 1 A resistive Class II

Installation Guide

Identification

Danfoss -EXD-316-Electronic-Controller- (2)

Dimensions [mm] / Mål [mm]

Danfoss -EXD-316-Electronic-Controller- (3)

Application 1

Application 2 Danfoss -EXD-316-Electronic-Controller- (5)

Battery back up

Danfoss -EXD-316-Electronic-Controller- (1)

Connections

Necessary connections

Terminals:

  • Supply voltage 24 V a.c. / d.c.
  • 3-4 Battery (the voltage will close the ETS valve if the controller lose s its supply voltage. The battery voltage must be kept disconnected from terminals 1 and 2.
  • 5-8 Supply to step motor.
  • 9-13 Operation via data communication from a MCX controller.
  • 20-21 Switch function for start/stop of regulation. If a switch is not connected, terminals 20 and 21 must be shortcircuited.

Application dependent connections

Superheat control

  • 14-15 Pt 1000 sensor at evaporator outlet (S2).
  • 15-16 Pt 1000 sensor for measuring air temperature (S4).
  • 17-19 Pressure transmitter type AKS 32R (the signal can not be shared with other controllers). Control of the valves opening degree with analog signal
  • 21-22 Current signal or voltage signal from other regulation (Ext.Ref.)
  • 24-26 Alarm relay

There is connection between 24 and 26 in alarm situations. When the controller is  there is connection between 24 and 25.

The Product contains electrical components
And may not be disposed together with domestic waste.
Equipment must be separate collected with Electrical and Electronic waste. According to Local and currently valid legislation.

FAQ

  • Q: Can the product be disposed of with domestic waste?
    A: No, the product contains electrical components and should be separately collected with electronic waste in accordance with local legislation.
  • Q: What is the maximum power supply voltage supported?
    A: The product supports a maximum of 24 V, 1 A resistive Class II power supply.

Documents / Resources

PDF thumbnailEXD 316 Electronic Controller
Installation Guide · EXD 316, 84B3154.10, 84B3155.10, EXD 316 Electronic Controller, Electronic Controller, Controller

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. je cherche des régulateurs de détendeurs électronique Danfoss EXD 316 neuf

    Daoud malek asks je cherche des régulateurs de détendeurs électronique Danfoss EXD 316 neuf
    Manuals+ clarified question
    Question

    Where can I find or purchase new Danfoss EXD 316 electronic expansion valve controllers?

    Answer

    To purchase a new Danfoss EXD 316 Electronic Controller (Identification No. 084B8042), you should contact an authorized Danfoss distributor or a local HVAC/R refrigeration wholesaler. Manuals+ provides technical documentation and installation guides but does not sell hardware directly.

    When ordering, ensure you specify the correct version as shown in the manual: the EXD 316 CANBUS version. You may also need related components mentioned in the guide, such as Pt 1000 sensors (S2/S4), AKS 32R pressure transmitters, or ETS/KVS valves, depending on your specific application.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.