Danfoss EV310B Solenoid Valve Type
Specifications
- Model: EV310B
- Pressure Range: 1.5 – 3.5 bar
- Valve Type: Normally Closed (NC) and Normally Open (NO)
- Materials: FKM
Product Usage Instructions
Installation:
- Ensure the valve is compatible with your system requirements.
- Mount the valve securely in the designated location.
- Connect the necessary pipes according to the inlet/outlet markings on the valve.
Valves with Manual Override:
If your valve has manual override functionality, follow these steps:
- Locate the manual override lever on the valve.
- To manually operate the valve, move the lever in the specified direction.
Spare Parts:
If you need to replace any parts, refer to the following information:
- NC Spare Parts: 032U2033, 032U2035
- NO Spare Parts: 032U2036
- Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material.
- Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product.
- All trademarks in this material are the property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
FAQ
Q: What should I do if the valve is not operating correctly?
A: Check the connections and ensure proper installation. If issues persist, contact customer support for assistance.
Q: Can I adjust the pressure range of the valve?
A: The pressure range of the valve is fixed and should not be adjusted. Using the valve outside its specified range may cause damage.
Documents / Resources
 |
Danfoss EV310B Solenoid Valve Type [pdf] Installation Guide EV310B 1.5 - 3.5B NC, EV310B 1.5 - 3.5B NO, EV310B 2 B G18 - F NC 000, EV310B 1.5 - 3.0B NC FL, EV310B 1.5 - 3.0B NO FL, EV310B Solenoid Valve Type, EV310B, Solenoid Valve Type, Valve Type |