Danfoss ET9550 Workshop Cutting Machine
INSTRUCTION MANUAL
Manufacturer:
UNIFLEX-Hydraulik GmbH
Robert-Bosch-Strasse 50-52
D-61184 Karben
Germany
Phone: +49 (0) 60 39 / 91 71 – 0
Fax: +49 (0) 60 39 / 91 71 – 181
This Operating Manual of the machine is a translation; the original is in German.
Date of revision: 2024-07-22
Version: 1.2
© Copyright by UNIFLEX-Hydraulik GmbH
Technical modifications reserved.
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without explicit authorization are prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design.
Specifications
- Manufacturer: UNIFLEX-Hydraulik GmbH
- Address: Robert-Bosch-Strasse 50-52, D-61184 Karben,Germany
- Contact: Phone: +49 (0) 60 39 / 91 71 – 0, Fax: +49 (0) 60 39 /91 71 – 181
- Date of revision: 2024-07-22
- Version: 1.2
Product Description
The Cutting machine ET9500 is a product developed, designed, and manufactured by UNIFLEX-Hydraulik GmbH in compliance with EC Machinery Directive 2006/42/EC and UK-Supply of Machinery (Safety) Regulations 2008.
Design and Function
The machine is designed for cutting operations and is equipped with specific features to ensure safety and efficiency during use.
Technical Data
For detailed technical specifications, please refer to the manual provided with the machine.
Product Usage Instructions
Target Groups
Owner: The owner is responsible for ensuring the proper use of the machine. They can appoint a representative to act on their behalf.
Machine/Unit Fitters: Individuals responsible for assembling and setting up the machine must be at least 18 years old and have received appropriate training.
Operator: The operator is the individual who will be using the machine for cutting operations. They should be familiar with the safety guidelines and operating procedures.
Frequently Asked Questions (FAQ)
A: Unauthorized modifications to the machine are prohibited as they may compromise safety and functionality. Only approved components should be used.
Q: How should I dispose of the machine?
A: Follow the decommissioning and disposal instructions provided in the manual. Proper dismantling, recycling, and disposal of consumables and waste are essential.
“`
Documents / Resources
 |
Danfoss ET9550 Workshop Cutting Machine [pdf] Instruction Manual ET9550 Workshop Cutting Machine, ET9550, Workshop Cutting Machine, Cutting Machine |
