Danfoss DST X510 Rotary Sensor With Shaft
ROTATION DIRECTION
| Ref | CW Output | CCW Output |
| A | 0.5Vdc Output | 4.5Vdc Output |
| B | Zero angular position of 0 ° | Zero angular position of 0 ° |
| C | 4.5Vdc Output | 0.5Vdc Output |
Ex: 098G1000
SINGLE- ± 90°- supply 7 – 36 V – output 0.5..4.5V – clockwise CW
ELECTRICAL CONNECTIONS
AMP VERSION
CONNECTIONS
- GROUND 1
- + SUPPLY 1
- OUTPUT 1
- GROUND 2
- + SUPPLY 2
- OUTPUT 2
CAN CONNECTIONS
- OV (GND)
- +Vs (+9 … +36 Vdc)
- NC
- NC
- CAN-L
- CAN-H
DEUTSCH VERSION
CONNECTIONS
- GROUND 1
- + SUPPLY 1
- OUTPUT 1
- GROUND 2
- + SUPPLY 2
- OUTPUT 2
CAN CONNECTIONS
- OV (GND)
- +Vs (+9 … +36 Vdc)
- NC
- NC
- CAN-L
- CAN-H
To ensure the degree of protection IP68, the connector must be coupled with a DEUTSCH DT06-6S female connector.
LOAD CONDITIONS
- Output: +0.5 Vdc…+4.5 Vdc with +5 Vdc power supply: apply load resistance >10 kΩ
- Output: +0.5 VDC…+4.5 VDC with +5 VDC power supply: apply load resistance >10 kΩ
- Outputs: +4…20 mA with < + 15..36Vdc power supply: maximum allowed load resistance is 200Ω Outputs +4…20 mA with > + 15..36Vdc
- power supply: maximum allowed load resistance is 500Ω
Danfoss A/S, with the “CE” mark, is manufactured according to the Community Directives and the related
National Legislation of conception
- 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
- 2014/30/EU Electromagnetic Compatibility (EMC)
- 2001/95/EC General product safety
MOUNTING
- Mount the sensor using M4 screws in nonmagnetic stainless steel: eg AISI 316 or brass (not included).
- The maximum torque amounts to 2.5Nm.
Frequently Asked Questions
Q: What is the maximum torque for mounting the sensor?
A: The maximum torque for mounting the sensor is 2.5Nm.
Q: What is the output range of the sensor?
A: The sensor has an output range from +0.5 Vdc to +4.5 Vdc.
Q: How should I connect the sensor electrically?
A: Follow the specified pin configurations for either the AMP Version or the DEUTSCH Version as mentioned in the user manual.
Documents / Resources
 |
Danfoss DST X510 Rotary Sensor With Shaft [pdf] Installation Guide DST X510 Rotary Sensor With Shaft, DST X510, Rotary Sensor With Shaft, Sensor With Shaft, With Shaft |