ENGINEERING TOMORROW
042R9019
Installation guide
Solenoid coil
Type AB, AM, AC, AK, AL, AP, BB, BA, BC, and BD
| Type of control | 1 | |
| Class of protection | Class I | |
| Ambient temperature | See Tambient on coil | |
| Voltage variation Voltage tolerances | For voltage variation, see print on coil For voltage tolerances see datasheet, when ordering the coil |
|
| Humidity | Only none-conductive pollution occurs except that occasionally a temporary conductivity caused by condensation is to be expected. | |
| Ball pressure test | 200 °C (392 °F) in accordance to IEC 60695-10-2 | |
| Impulse withstand voltage | Spade Plug Plug |
4.0 kV at altitude <4000 m (13123 ft) 4.0 kV at altitude <2000 m (6561 ft) 3.1 kV 2000 m<altitude<4000 m (6561<altitude<13123 ft) |
| Overvoltage category | III | |
| Degree of protection IPxx Pollution degree PDX | Enclosure rating according to IEC standard 60529 (See illustration for details A-B) Pollution degree according to EN60664-1 (See illustration for details A-B) | |
| Installation | Integrated control Incorporated control Independently mounted control (IP65/1P67) |
|
| Suitable cable, Conductor size for plug | Ø6.6 — 011 mm (Ø0.26 — Ø0.43 in) 0.75 — 1.5 mm2(21 — 15 AWG flexible cord) |
|
| Suitable cable for cable plug | See datasheet when ordering the coil | |
| Cable conductor size | 3 x 0.75 mm2 (3 x 0.001 in2) | |
| Plugs can be removed/mounted | 10 times | |
| Surface temperature | Independently mounted controls must be inaccessible in normal use if the surface temperature on the control > 85°C | |
- Only qualified personnel is allowed to install or maintain this product
- Disconnect the power when dismounting the coil
- Avoid direct exposure to alkaline conditions, use in neutral conditions is recommended
- Ensure that the O-ring is in place on the valve
- If the coil is used as independently mounted control, the end-user shall use a plastic cable gland with strain relief
Visit www.products.danfoss.com for further technical data
© Danfoss | Climate Solutions | 2021.12
AN353730866505en-000301
Info for UK customers only: Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
Documents / Resources
 |
Danfoss AB Solenoid Coil [pdf] Installation Guide AB, AM, AC, AK, AB Solenoid Coil, AB, Solenoid Coil, Coil, AL, AP, BB, BA, BC, BD |
