Danfoss 8238-15 Remote Kit for BD Compressors
Specifications
- Product Name: Remote Kit for BD Compressors
- Cable Length: 750 mm
- Model Number: 8238-15
- Packages: Single Pack
Product Usage Instructions
Dimenion
- Packages 750 mm
- Single Pack 105N9100
Installation
- Locate the BD Compressor unit where you want to install the remote kit.
- Connect the 750 mm cable from the remote kit to the designated port on the compressor.
- Ensure the connection is secure and the cable is not tangled or obstructed.
Operation:
- Once installed, use the remote kit to control the BD Compressor wirelessly.
- Follow the instructions provided in the user manual for specific functions and settings.
- Keep the remote kit within a reasonable range for optimal performance.
Visit our Homepage: compressors.danfoss.com
FAQ
Q: Can I use the remote kit with other compressor models?
A: The remote kit is specifically designed for BD Compressors and may not be compatible with other models.
Q: How do I troubleshoot connectivity issues with the remote kit?
A: Check the batteries in the remote, ensure proper alignment, and verify there are no obstructions between the remote and the compressor.
Q: Is it possible to extend the cable length of the remote kit?
A: It is recommended to use the provided 750 mm cable for optimal performance and safety.
Documents / Resources
 |
Danfoss 8238-15 Remote Kit for BD Compressors [pdf] Instructions 8238-15, 8569-4, 105N9100, 8238-15 Remote Kit for BD Compressors, 8238-15, Remote Kit for BD Compressors, Kit for BD Compressors, BD Compressors |