Danfoss 520H0620 Multi Function Tool
Installation Instruction
- Manual open / close of ICM without ICAD installed
- Mounting of ICAD on ICM
Nm LB-feet 3 2.5 - Removal of function module (ICS)
- Operation of manual spindle (ICS or PM)
© Danfoss A/S (MWA), 2015-01
DKRCI.PI.HU0.A3.02 / 520H0620
Documents / Resources
 |
Danfoss 520H0620 Multi Function Tool [pdf] Installation Guide 027R9781, 520H0620, 520H0620 Multi Function Tool, Multi Function Tool, Function Tool |
