Danfoss 087R9247 ESMT Outdoor Temperature Sensor

Specifications

• Model: ESMT
• Type: Outdoor Temperature Sensor
• Sensor Type: Pt 1000
• Electrical Connection: Two-wire non-polarized (can be crossed)
• Connection Cable: 2 x 0.4 – 1.5 mm2

Product Usage Instructions

Mounting:

The sensor should be mounted on the coldest elevation of the building/zone, typically the north elevation.

Electrical Connection:

Connect the sensor using a two-wire non-polarized connection. The connection cable should be 2 x 0.4 – 1.5 mm2.

Graph

• Type ESMT is a Pt 1000 Ω outdoor temperature sensor.

Mounting

The sensor is mounted on the coldest elevation of the building/zone (normally the north elevation).

Electrical connection

Two-wire non-polarized (can be crossed). Connection cable: 2 x 0.4 – 1.5 mm2.

MORE INFORMATION

• ESMT outdoor temperature sensor
  • www.heating.danfoss.com
• ESMT: www.heating.danfoss.com
  • https://www.youtube.com/user/DanfossHeating
    • Playlists – How-to Videos -> District Energy installation videos

Danfoss can accept no responsibility for possible errors in catalogues, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies t products already on order, provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are the property of the respective companies. Danfoss and all Danfoss logotypes are trademarks of Danfoss A/S. All rights reserved

CONTACT INFORMATION

• Danfoss A/S
• Heating Segment
• danfoss.com
• +45 7488 2222
• E-Mail: heating@danfoss.com

FAQs

• Q: Where should I mount the ESMT outdoor temperature sensor?
  • A: The sensor should be placed on the coldest elevation of the building, usually the north side.
• Q: What type of sensor is ESMT?
  • A: ESMT is a Pt 1000 outdoor temperature sensor.
• Q: How should I make the electrical connections for ESMT?
  • A: Use a two-wire non-polarized connection for ESMT. The connection cable should be 2 x 0.4 – 1.5 mm2.

Documents / Resources

Danfoss 087R9247 ESMT Outdoor Temperature Sensor [pdf] Instructions 084R9247, 087R9247, 087R9247 ESMT Outdoor Temperature Sensor, ESMT Outdoor Temperature Sensor, Outdoor Temperature Sensor, Temperature Sensor, Sensor

References

• User Manual