Danfoss 015G4063 Aveo Remote Sensor Service Kit

Product Information

• Product Name: Service Kit Thermostatic Sensors Series
• Model Number: Code no. 013G1246

Product Usage Instructions

1. Installation Guide: Please refer to the user manual for detailed installation instructions.
2. Ensure that the product is installed within a range of 0-2m from the desired location.
3. To activate the sensor, press the “click” button on the device.
4. For maximum performance, set the maximum temperature limit to 4.
5. Adjust the desired temperature by following these steps:
   1. Press the “MAX” button on the device.
   2. Enter the desired temperature value, for example: MIN = 2.
   3. Press the “MAX” button again to confirm the setting.
6. Product Code: AN447479025494en-000102
7. For any further assistance or inquiries, please refer to the user manual or contact our customer support.

Installation

Remote sensor

Temperature Limitation

Temperature Limitation

Blind mark

Installation

ABOUT COMPANY

• DanfossA/5
• Climate Solutions
• danfoss.com
• +45 7488 2222

Documents / Resources

Danfoss 015G4063 Aveo Remote Sensor Service Kit [pdf] Installation Guide 015G4063, 013G1246, 015G4950, 015G4951, 015G4063 Aveo Remote Sensor Service Kit, Aveo Remote Sensor Service Kit, Remote Sensor Service Kit, Sensor Service Kit, Service Kit, Kit

References

• User Manual