DBS3000B Extra Battery
“
Product Information
Specifications
- General Info: Approximately 25.2kg (55.5lbs),
432×254.5×303.5mm (17x10x12in) - Capacity: 3001.6Wh (44.8V 67Ah)
- Certification: ETL, CE, FCC, PSE, UKCA, WEEE,
ROHS
Battery Information
- Cell Chemistry: LiFePO4
- Cycle Life: 4000 cycles to 80%+ capacity
Environmental
- Operating Temperature: 20~30°C (68~86°F)
- Optimal Operating Temperature: -10~45°C
(14~113°F) - Discharge Temperature: 0~45°C (32~113°F)
- Charge Temperature: -10~45°C (14~113°F)
Safety Instructions
Usage
- Do not use the product near a heat source.
- Avoid contact with any liquid; do not immerse in water.
- Avoid environments with strong static electricity/magnetic
fields. - Do not disassemble the product or pierce it with sharp
objects. - Avoid using wires or metal objects that may cause a short
circuit. - Use only official components and accessories.
- Follow specified operating environment temperature.
Product Usage Instructions
Getting Started
Product Details
Familiarize yourself with the physical features and components
of the Dabbsson DBS3000B Extra Battery.
LCD Screen
Check the LCD screen for important information such as battery
level, charging status, and output power.
General Product Usage
Connect the extra battery to your device using the appropriate
ports and cables.
Solar Charging
To charge the battery using solar power, place it under direct
sunlight in optimal conditions.
AC Charging
You can also charge the battery using an AC power source. Use
the provided charger and follow instructions.
Using Extra Battery DBS3000B
Ensure proper connection to your device and monitor the battery
level for efficient usage.
FAQs
Troubleshooting
If you encounter any issues with the product, refer to the
troubleshooting section of the manual for solutions.
Storage & Maintenance
Store the extra battery in a cool, dry place when not in use.
Regularly check and maintain its condition for optimal
performance.
“`
Dabbsson DBS3000B Extra Battery User Manual
DISCLAIMER
Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the terms of use and disclaimer at https://www.dabbsson.com and stickers on the product before use. Users take full responsibility for all usage and operations. Familiarize yourself with the related regulations in your area. You are solely responsible for being aware of all relevant regulations and using Dabbsson products in a way that is compliant.
CONTENTS
1. Specifications
1
2. Safety Instructions
2.1 Usage 3. Getting Started
3.1 Product Details 3.2 LCD Screen 3.3 General Product Usage 3.4 Solar Charging 4. FAQs
2 2.2 Disposal Guide
3 3.5 AC Charging 3.6 Using Extra Battery DBS3000B
9
5. Troubleshooting
10
6. What’s in the Box
11
7. Storage & Maintenance
11
1. Specifications
General Info Net Weight Dimensions Capacity Certification
Input Ports Extra Battery Input Port Solar Charger
Output Ports Extra Battery Port Output Anderson Port Anderson Port
Approximately 25.2kg55.5lbs 432×254.5×303.5mm (17x10x12in) 3001.6Wh (44.8V 67Ah) ETL CE FCC PSE UKCA WEEE ROHS
48V 3000W Max 12-60V 12.5A Max 600W Max Per Port, Double to 1200W Max
42-51V 3000W Max 12.6V 25A 24V 18A
Battery Info Cell Chemistry Cycle Life
LiFePO4 4000 cycles to 80%+capacity
Environmental Operating Temperature
Optimal Operating Temperature Discharge Temperature Charge Temperature Storage Temperature
20~30(68~86) -10~45(14~113) 0~45(32~113) -10~45(14~113)
* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.
Protection
Overload Protection Short Circuit Protection Low Voltage Protection
Over Temperature Protection Low Temperature Protection Overcurrent Protection
1
2. Safety Instructions
2.1 Usage
1. Do not use the product near a heat source, such as a fire or a heating furnace. 2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use
the product in rain or humid environments. 3. Do not use the product in an environment with strong static electricity/magnetic fields. 4. Do not disassemble the product in any way or pierce the product with sharp objects. 5. Avoid using wires or other metal objects that may result in a short circuit. 6. Do not use unofficial components or accessories. If you need to replace any components or
accessories, visit official Dabbsson channels to check for relevant information. 7. When using the product, follow the operating environment temperature specified in this user
manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work. 8. Do not stack any heavy objects on the product. 9. Do not forcibly lock the fan during use or place the product in an unventilated or dusty area. 10. Avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts. 11. If you accidentally drop the product into water during use, please place it in a safe open
area, and stay away from it until it is completely dry. The dried product should not be used again, and should be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher. 12. Use a dry cloth to clean off dirt on the product ports. 13. Rest the product on a flat surface to avoid damage caused by the product falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from combustible matter and people, and dispose of it in accordance with local laws and regulations. 14. Ensure that the product is kept out of reach of children and pets. 15. Do not connect the smart extra battery to another smart extra battery.
2
2.2 Disposal Guide
1. If conditions permit, make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, do not dispose of the battery directly in the battery recycling box. In such cases, contact a professional battery recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.
3. Getting Started
3.1 Product Details
LCD Screen
Main Power Button
Anderson Port(24V/18A) Anderson Port(12.6V/25A)
Extra Battery Port Solar Charging Input Port(x2)
3
OUTPUT
12V 20A
24V 18A
INPUT 11-75Vd.c.
3.2 LCD Screen
b
d
f
a
ce
g h
i
j
k
m l
a Error Code d Overload Warning g Extra Battery Indicator j Input Power m Output Power
b Low Temperature Warning e Connection Failed h Solar Panel Indicator k Remaining Battery Percentage
c High Temperature Warning f DC Output i Remaining Charge/Discharge Time l Fan Indicator
3.3 General Product Usage
Short Press to Turn On
Long Press to Turn Off 4
Product On, Product Off, LCD Screen On
Short press the main power button to start the product; The LCD screen lights up and displays an icon. The LCD screen will automatically turn off after the product is idle for 30 seconds. When the product senses any load change or operation, the display screen will automatically light up. To turn the display on or off, briefly press the main power button. To turn off the product, press and hold the main power button. The default standby time of the product is 2 hours. The product will automatically shut down when other power buttons are turned off and no other load is accessed within 2 hours. Standby time of AC and DC can be set on APP.
3.4 Solar Charging
Users can connect solar panels in series as shown in the figure to recharge the product. The product supports 12-60V DC input, 12A max current, and 600W max charging power.
OUTPUT
12V 20A
24V 18A
INPUT 11-75Vd.c.
Connect XT60 port
Connection with solar panel
MC4 Connection
200W Solar PanelX3
5
Connection with solar panel
MC4 Connection
OUTPUT
12V 20A
24V 18A
INPUT 11-75Vd.c.
Connect XT60 port
200W Solar PanelX3 Connection with solar panel
MC4 Connection 200W Solar PanelX3
6
3.5 AC Charging
Dabbsson fast charge technology is specifically for AC charging, offering 1800W of max input power. You can control the charging power through the AC Charge Speed Switch. The default max input power for the AC charging speed is 600W,
LIGHT ON/OFF
5V 2.4A
FAST CHARGE
PD 100W
USB ON/OFF
PD 30W IOT RESET
10A
30A
4A
DEVICE
12V ON/OFF
Fast Charging 1800W Max Input Power
5 hrs Full Charge
AC Charging Cable
7
3.6 Using Extra Battery DBS3000B
A single DBS2300 can be connected to two DBS3000B extra batteries for added capacity. Refer to the user manuals of the Extra Battery DBS3000B for detailed instructions. Precautions: 1. Turn off both the Extra Battery DBS3000B and DBS2300 before connecting or disconnecting
them. 2. Before using, make sure both DBS2300 and Extra Battery DBS3000B display the extra battery
icon on their screens. 3. Turn off the Extra Battery DBS3000B before connecting or disconnecting it. 4. Do not touch the metal terminals of the Extra Battery DBS3000B connector. If the metal
terminals need to be cleaned, gently wipe them with a dry cloth.
LIGHT ON/OFF
5V 2.4A
FAST CHARGE
PD 100W
USB ON/OFF
PD 30W IOT RESET
10A
30A
4A
DEVICE
12V ON/OFF
8
LIGHT ON/OFF
5V 2.4A
FAST CHARGE
PD 100W
USB ON/OFF
PD 30W IOT RESET
10A
30A
4A
DEVICE
12V ON/OFF
4. FAQS
1. What type of batteries does this product use? This product uses high-quality LiFePO4 battery.
2. How long does it take for the product to charge my devices? The charging time is shown on the product’s LCD Screen, which can be used to estimate the charging time of most appliances with stable power usage.
3. How can I tell if the product is charging? The remaining charging time will be shown on the LCD Screen. The charging indicator will display remaining battery percentage, while current input power is shown to the right of the charging indicator.
4. How do I clean the product? Gently wipe it with a dry, soft, clean cloth or paper towel.
9
5. How should I store the product? Before storing, first turn off the product and then store it in a dry, ventilated place at room temperature. Do not place it near water sources. For long-term storage, discharge the battery to 30% and recharge it to 100% every three months to extend battery life.
6. Can I bring the product on a plane? No
5. Troubleshooting
Indicator
Problem
Solution
High Temperature Charge Protection
Charging will automatically resume after the battery cools down.
High Temperature Power supply will automatically resume
Discharge Protection
after the battery cools down.
(Flashing)
Low Temperature Charge Protection
Charging will automatically resume
after battery temperature rises above -10 (14).
Low Temperature Discharge Protection
Power supply will automatically resume
after the battery temperature rises above -20 ( -4).
DC Output/Input Overload Protection
The product will automatically resume normal operation after you remove the
device connected to the DC outlet.
DC Output High
The product will automatically resume
(Flashing)
Temperature Protection normal operation after it cools down.
(Flashing)
Battery Overload Protection,
Short Circuit Protection
Remove any high-power electrical appliances connected to the product.
Others
Contact Dabbsson Customer Service
10
If the Alarm Prompt shows on the product LCD screen during use and does not disappear after a restart, please stop using it immediately (do not try to charge or discharge).If you require any other assistance, please contact Dabbsson Customer Service.
6. What’s in the Box
Dabbsson DBS3000B Extra Battery
Dabbsson DBS3000B Extra Battery User Manual
User Manual
Extra Battery Cable
24-MONTH WARRANTY
CLAIM YOUR WARRANTY Warranty Activation
Activate your warranty at www.dabbsson.com
Register Porduct Fill in Your Information Keep the original packaging & accessories
Products must be returned in their original condition and packaging with all included accessories for the warranty to be valid.
Have any question? Chat with a specialist today. US: support.us@dabbsson.com EU: support.eu@dabbsson.com
+1 888 850 9503 Mon-Fri 9am-5pm (PST) Follow Us
@Dabbsson_Global @DabbssonOfficial @Dabbsson_Official If you have any question, please do not hesitate to contact us.
Warranty Card
7. Storage & Maintenance
1. Ideally, use and store the product at an am bieut temperature between 20-30(68-86), and always keep it away from water, intense heat, and sharp objects. Do not store at temperatures above 45(113) or below-10(14)for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. DBS3000B mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is at about 100% before putting DBS3000B into long-term storage. While in storage, it is recommended to discharge the battery to 30% and recharge it back to 100% every three months.
11
8. Declaration of Conformity
We, SHENZHEN DAIPUSEN NEW ENERGY TECHNOLOGY CO., LTD. declare under our sole responsibility that the above referenced product is in conformity with the applicable requirements of the following directives:
RED Directive: RoHS Recast Directive: REACH Regulation:
2014/30/EU 2011/65/EU (EU)2015/863 2006/1907/EC
Read the declaration of conformity and access the download link here at https://dabbsson.com/pages/eu-compliance
Have any question? Chat with a specialist today.
US: support.us@dabbsson.com EU: support.eu@dabbsson.com
+1 888 850 9503 Mon-Fri 9am-5pm (PST)
Follow Us
@Dabbsson_Global @DabbssonOfficial @Dabbsson_Official
If you have any question, please do not hesitate to contact us.
12
Documents / Resources
 |
DABBSSON DBS3000B Extra Battery [pdf] User Manual DBS3000B, DBS3000B Extra Battery, Extra Battery, Battery |