Modulmanualer og brugervejledninger

Beijer GT-225F digitalt udgangsmodul brugermanual

22. december 2025

Beijer GT-225F Digital Output Module Specifications Channels: 16 Voltage: 24 VDC Strøm: 0.3 A Type: Vask Terminal: Bur clamp, 18 pt removable Product Usage Instructions Installation Ensure power is off before installation. Connect the module to the appropriate power source.…

Mærke: Beijer

APC Infinity 2.0 Smart Gate Automation Management Module User Guide

22. december 2025

APC Infinity 2.0 Smart Gate Automation Management Module Product Information Specifications Compatible With: Proteous Model: Infinity 2.0 Feature: WiFi Control Smart Gate Automation Management Module Product Using Instructions Disconnect the power supply to the control unit. Insert the module into…

Mærke: APC

Electrobes FT232 USB to TTL Serial Adapter Module Instruction Manual

20. december 2025

USB-TO-TTL-FT232 Overview Introduction The USB-TO-TTL-FT232 is a UART serial module that converts a USB interface to TTL level. With this converter, a computer or other device with a USB interface can connect to TTL logic level devices, such as microcontrollers,…

Mærke: ELECTROBES

CODLAI AM312 infrared PIR Motion Sensor Module User Guide

20. december 2025

CODLAI AM312 infrared PIR Motion Sensor Module User Guide www.codlai.com/en Who Are We? CODLAI TECHNOLOGIES INC. CODLAI Technology Inc. was founded during the pandemic, when the challenges and shortcomings of distance learning became apparent. During this period, it was observed…

Brand: CODLAI

Alfred ZW2-8LR,Z-Wave 800 Long Range Module User Guide

19. december 2025

Alfred ZW2-8LR,Z-Wave 800 Long Range Module User Guide Important Safety Information Please read this quick start guide carefully for correct and effective use. Failure to follow the recommendations set forth by Alfred Inc. may be dangerous or cause a violation…

Mærke: Alfred

i safe MOBILE MIM1xA01 Interface Modul Brugsanvisning

19. december 2025

IS-IM1x.1 INTERFACE-MODUL TIL IS940.x/IS945.x MONTERET I IS-DS940.1 BRUGERVEJLEDNING MIM1xA01 Interface-modul IS-IM1x.1 | MODEL MIM1xA01 Dokumentnr. 1077MM01REV00 Version: 2025-11-13 i.safe MOBILE GmbH i_Park Tauberfranken 10 97922 Lauda-Koenigshofen Tyskland Tlf. +49 9343 60148-0 info@isafe-mobile.com www.isafe-mobile.com (c) 2025 i.safe…

Mærke: i safe MOBILE

AAON WSHP-454 Module Installation Guide

18. december 2025

WSHP-454 Module Specifications Model: WSHP-454 Manufacturer: AAON Power Requirement: 24 VAC Sensor Type: Suction Pressure Sensor Relay Contact Rating: 1 Amp max @ 24 VAC Compatibility: Single or dual water circuit configuration Glycol Configurations: 0%-40% in increments of 5%…

Mærke: AAON

FN-LINK 6252BA-SR Wi-Fi Dual-band Bluetooth 5.2Combo Module Owner’s Manual

18. december 2025

FN-LINK 6252BA-SR Wi-Fi Dual-band Bluetooth 5.2Combo Module Product Specification Model: 6252BA-SR Wireless: Wi-Fi Dual-band 2x2 11ax + Bluetooth 5.2 Combo Module Version: v1.3 Product Information Description: This product is a Wi-Fi Dual-band module with Bluetooth compatibility. It supports IEEE 802.11…

Mærke: Fn-Link

Shenzhen Q880-AF 4G industrielt routingmodul brugermanual

18. december 2025

Shenzhen Q880-AF 4G Industrial Routing Module Specification 4G LTE Dual LAN/1WAN+1LAN+ 4G + wifi + TTL Transparent Transmission Omni-directional 4G antenna, with good signal and stable transmission Support for CAT 4 Industrial-grade products have stable performance Product description In the…

Mærke: Shenzhen

VAPOTHERM 2BNMU-ACCESS365 BLE/Wi-Fi Module User Manual

16. december 2025

VAPOTHERM 2BNMU-ACCESS365 BLE/Wi-Fi Module Product Specifications Physical Characteristics Dimensions: Height 9”, width 9”, depth 4” Weight: 4.1 lbs. Mounting: VESA Oxygen Assist Module Pole Mount Assembly Connections: Via Oxygen Assist Module communication cable to Precision Flow System Requirements   Power:…

Mærke: VAPOTHERM